Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2007 Kia Sedona BaseFACTORY OEM SERVICE PROCEDURE
Automatic Transaxle System DTCS
AUTOMATIC TRANSAXLE SYSTEM DIAGNOSTIC TROUBLE CODES DTC (LIST)
| Code | Item |
|---|---|
| P0707 | TRANSAXLE RANGE SWITCH CIRCUIT LOW INPUT |
| P0708 | TRANSAXLE RANGE SWITCH CIRCUIT HIGH INPUT |
| P0712 | TRANSAXLE FLUID TEMPERATURE SENSOR CIRCUIT LOW INPUT |
| P0713 | TRANSAXLE FLUID TEMPERATURE SENSOR CIRCUIT HIGH INPUT |
| P0717 | A/T INPUT SPEED SENSOR CIRCUIT - OPEN or SHORT(GND) |
| P0722 | AT OUTPUT SPEED SENSOR CIRCUIT - OPEN or SHORT(GND) |
| P0731 | GEAR 1 INCORRECT RATIO |
| P0732 | GEAR 2 INCORRECT RATIO |
| P0733 | GEAR 3 INCORRECT RATIO |
| P0734 | GEAR 4 INCORRECT RATIO |
| P0735 | GEAR 5 INCORRECT RATIO |
| P0741 | TORQUE CONVERTER CLUTCH STUCK OFF |
| P0742 | TORQUE CONVERTER CLUTCH STUCK ON |
| P0743 | TORQUE CONVERTER CLUTCH CONTROL SOLENOID VALVE - OPEN or SHORT(GND) |
| P0748 | VFS solenoid - OPEN or SHORT(GND) |
| P0750 | LOW and REVERSE SOLENOID VALVE CIRCUIT - OPEN or SHORT(GND) |
| P0755 | UNDERDRIVE SOLENOID VALVE CIRCUIT - OPEN or SHORT(GND) |
| P0760 | SECOND SOLENOID VALVE CIRCUIT - OPEN or SHORT(GND) |
| P0765 | OVERDRIVE SOLENOID VALVE CIRCUIT - OPEN or SHORT(GND) |
| P0770 | RED SOLENOID |
| P0885 | A/T CONTROL RELAY - OPEN or SHORT(GND) |
| P0890 | TCM power Relay sense circuit low |
| P0891 | TCM power Relay sense circuit High |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.