Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSKIA2007RONDO L4-2.4LREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSENGINECYLINDER BLOCK ASSEMBLYCONNECTING ROD, ENGINE
2007 Kia Rondo L4-2.4L
Connecting Rod, Engine
2007 Kia Rondo L4-2.4LSECTION Connecting Rod, Engine
Connecting rod
Connecting rod big end inner diameter
Specification 51.000 - 51.018 mm (2.0079 - 2.0086 in)
Side clearance
Specification 0.10 - 0.25 mm (0.0039 - 0.0098 in)
Limit 0.35 mm (0.0138 in)
Connecting rod bearing cap bolts 19.6 Nm (2.0 kgf-m, 14.46 lb-ft) + 90°
Connecting rod big end inner diameter
Specification 51.000 - 51.018 mm (2.0079 - 2.0086 in)
Side clearance
Specification 0.10 - 0.25 mm (0.0039 - 0.0098 in)
Limit 0.35 mm (0.0138 in)
Connecting rod bearing cap bolts 19.6 Nm (2.0 kgf-m, 14.46 lb-ft) + 90°
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.