2007 Kia AmantiFACTORY OEM SERVICE PROCEDURE

Ignition System

IGNITION SYSTEM SPECIFICATIONS

Items Specification
Ignition coil Primary resistance 0.62Ξ© i 3/4 10 %
Secondary resistance 7.0KΞ© i 3/4 15 %
Spark plugs Unleaded NGK IFR5G-11
Gap 1.0 ~ 1.1 mm (0.0394 ~ 0.0433 in.)
Leaded NGK BKR5ES
Gap 0.8 ~ 0.9 mm (0.0315 ~ 0.0354 in.)
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.