Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2006 Kia Spectra L4-2.0LFACTORY OEM SERVICE PROCEDURE
Cruise Control Switch: Testing and Inspection
CRUISE CONTROL MAIN SWITCH
INSPECTION
1. Disconnect the cruise control switch connector.
2. Measure continuity between terminals on the control switch when each function switch is ON.
3. If there is no continuity, replace the auto cruise switch.
INSPECTION
1. Disconnect the cruise control switch connector.
2. Measure continuity between terminals on the control switch when each function switch is ON.
3. If there is no continuity, replace the auto cruise switch.
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.