2006 Kia Rio L4-1.6LFACTORY OEM SERVICE PROCEDURE

Intake Manifold

Intake Manifold
Intake manifold and cylinder head fixing nut
Quantity 6
Tightening Torque 14.7 - 19.6 Nm (1.5 - 2.0 kgf.m, 10.8 - 14.5 ft. lbs.)
Intake manifold and cylinder head fixing bolt (8X45)
Quantity 2
Tightening Torque 14.7 - 19.6 Nm (1.5 - 2.0 kgf.m, 10.8 - 14.5 ft. lbs.)
Intake manifold and cylinder head fixing bolt (8X22)
Quantity 1
Tightening Torque 14.7 - 19.6 Nm (1.5 - 2.0 kgf.m, 10.8 - 14.5 ft. lbs.)
Intake manifold stay bolt
Quantity 4
Tightening Torque 17.7 - 24.5 Nm (1.8 - 2.5 kgf.m, 13.0 - 18.1 ft. lbs.)
Throttle body and surge tank fixing bolt and nut 4 14.7 - 19.6 Nm (1.5 - 2.0 kgf.m, 10.8 - 14.5 ft. lbs.)
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.