Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2006 Kia AmantiFACTORY OEM SERVICE PROCEDURE
Engine Control System
ENGINE CONTROL SYSTEM
| Items | N.m | Kgf.m | lbf.ft |
|---|---|---|---|
| ECM installation nut | 3.9 ~ 5.9 | 0.4 ~ 0.6 | 2.9 ~ 4.3 |
| Mass air flow sensor clamp installation | 2.9 ~4.9 | 0.3 ~ 0.5 | 2.2 ~ 3.6 |
| Crankshaft position sensor installation bolt | 7.8 ~ 9.8 | 0.8 ~ 1.0 | 5.8 ~ 7.2 |
| Manifold Absolute Pressure Sensor installation bolt | 7.8 ~ 9.8 | 0.8 ~ 1.0 | 5.8 ~ 7.2 |
| Knock sensor installation | 19.6 ~ 24.5 | 2.0 ~ 2.5 | 14.5 ~ 18.1 |
| Heated Oxygen Sensor (Bank 1, Sensor 1) | 39.2 ~ 49.1 | 4.0 ~ 5.0 | 28.9 ~ 36.2 |
| Heated Oxygen Sensor (Bank 1, Sensor 2) | 39.2 ~ 49.1 | 4.0 ~ 5.0 | 28.9 ~ 36.2 |
| Heated Oxygen Sensor (Bank 2, Sensor 1) | 39.2 ~ 49.1 | 4.0 ~ 5.0 | 28.9 ~ 36.2 |
| Heated Oxygen Sensor (Bank 2, Sensor 2) | 39.2 ~ 49.1 | 4.0 ~ 5.0 | 28.9 ~ 36.2 |
| Camshaft position sensor installation bolt | 7.8 ~ 9.8 | 0.8 ~ 1.0 | 5.8 ~ 7.2 |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.