2005 Kia Spectra5 2.0 1, AutomaticFACTORY OEM SERVICE PROCEDURE

Component Locations

  1. Mass Air Flow Sensor (MAFS)
  2. Intake Air Temperature Sensor (IATS)
    Fig 1: Identifying Mass Air Flow Sensor & Intake Air Temperature Sensor
    G00719280Courtesy of KIA MOTORS AMERICA, INC.
  3. Engine Coolant Temperature Sensor (ECTS)
    Fig 2: Identifying Engine Coolant Temperature Sensor
    G00719281Courtesy of KIA MOTORS AMERICA, INC.
  4. Throttle Position Sensor (TPS)
  5. Camshaft Position Sensor (CMPS)
    Fig 3: Identifying Camshaft Position Sensor
    G00719283Courtesy of KIA MOTORS AMERICA, INC.
  6. Crankshaft Position Sensor (CKPS)
    Fig 4: Identifying Crankshaft Position Sensor
    G00719284Courtesy of KIA MOTORS AMERICA, INC.
  7. Heated Oxygen Sensor (HO2S, Sensor 1)
    Fig 5: Identifying Heated Oxygen Sensor
    G00719285Courtesy of KIA MOTORS AMERICA, INC.
  8. Injector
    Fig 6: Identifying Injector
    G00719286Courtesy of KIA MOTORS AMERICA, INC.
  9. Idle Speed Control Actuator (ISCA)
    Fig 7: Identifying Idle Speed Control Actuator
    G00719282Courtesy of KIA MOTORS AMERICA, INC.
  10. Vehicle Speed Sensor (VSS)
  11. Knock Sensor
    Fig 8: Identifying Knock Sensor
    G00719287Courtesy of KIA MOTORS AMERICA, INC.
  12. CVVT Oil Control Valve (OCV)
  13. Ignition Switch
  14. ECM
    Fig 9: Identifying ECM
    G00719289Courtesy of KIA MOTORS AMERICA, INC.
  15. CVVT Oil Temperature Sensor (OTS)
    Fig 10: Identifying CVVT Oil Control Valve & Oil Temperature Sensor
    G00719288Courtesy of KIA MOTORS AMERICA, INC.
  16. Purge Control Solenoid Valve (PCSV)
    Fig 11: Identifying Purge Control Solenoid Valve
    G00719290Courtesy of KIA MOTORS AMERICA, INC.
  17. Main Relay
    Fig 12: Identifying Main Relay
    G00719291Courtesy of KIA MOTORS AMERICA, INC.
  18. Ignition Coil
    Fig 13: Identifying Ignition Coil
    G00719292Courtesy of KIA MOTORS AMERICA, INC.
  19. DLC (Diagnostic Link Cable)
  20. Heated Oxygen Sensor (HO2S, Sensor 2)
    Fig 14: Identifying Heated Oxygen Sensor
    G00719293Courtesy of KIA MOTORS AMERICA, INC.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.