Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2005 Kia AmantiFACTORY OEM SERVICE PROCEDURE
Anti-Lock/Traction Control DTCS
ANTI-LOCK/TRACTION CONTROL DIAGNOSTIC TROUBLE CODE (DTC) LIST
| DTC | DESCRIPTION |
|---|---|
| DTC C1200, C1203, C1206, C1209 | WHEEL SPEED SENSOR OPEN OR SHORT |
| DTC C1201, C1204, C1207, C1210 | SPEED JUMP OR WRONG EXCITER |
| DTC C1202, C1205, C1208, C1211 | OTHER |
| DTC C1235, C1236, C1237 | PRESSURE SENSOR OPEN OR SHORT |
| DTC C1259, C1260 | STEERING WHEEL ANGLE SENSOR |
| DTC C1282, C1283 | YAW-RATE & LATERAL ACCELERATION SENSOR ERROR |
| DTC C1101, C1102 | UNDER OR OVER VOLTAGE |
| DTC C1604 | HECU HARDWARE |
| DTC C1503 | TCS/ESP SWITCH ERROR |
| DTC C1513 | BRAKE LAMP SWITCH ERROR |
| DTC C2112 | VALVE RELAY |
| DTC C1700 | VARIANT NO CODE |
| DTC C1611, C1612 | CAN TIMEOUT EMS |
| DTC C1616 | CAN BUS OFF ERROR |
| DTC C2402 | MOTOR PUMP FAILURE |
| DTC C2227 | BRAKE DISC TEMPERATURE TOO HIGH |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.