2004 Kia Spectra LS, 1.8 1, AutomaticFACTORY OEM SERVICE PROCEDURE

General Specifications

General Specifications

Item T8 DOHC
Engine idle speed 800 ± 50 rpm
Ignition coil Type Dual coil
Primary coil resistance 0.45 ~ 0.55 Ω@ 68°F (20°C)
Secondary coil resistance 13 ~ 15kΩ @ 68°F (20°C)
High-tension lead 16kΩ per 3.28 feet (1m)
Spark plug gap 0.027 ~ 0.031 in (0.7 ~ 0.8 mm)
Spark plug type NGK BKR6E
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.