Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2003 Kia Spectra Base, AutomaticFACTORY OEM SERVICE PROCEDURE
Service Specifications
AUTOMATIC SYSTEM
| Application | Specification | |||
|---|---|---|---|---|
| Compressor | ||||
| Type | HS-18 | |||
| Oil Type & Capacity | FD46XG, 140-160 cc | |||
| Condenser | PF | |||
| Dual Pressure Switch | ||||
| High | 426.7-483.5 psi (30-34 kg/cm2 ) | |||
| Low | 28.44-36.27 psi (2.00-2.55 kg/cm2 ) | |||
| Expansion Valve Type | Block | |||
| Refrigerant | ||||
| Type | R-134a | |||
| Capacity | 21.86-23.98 oz. (619.7-679.8 grams) | |||
| Evaporator Unit | ||||
| Thermistor | ||||
| On | 4.64-70.52°F (-15.2 To 21.4°C) | |||
| Off | 0.14-66.02°F (-17.7 To 18.9°C) | |||
| Cooling | ||||
| Cooling Capacity | 3325-3675 kcal/h | |||
| Air Volume | 450 CMH | |||
| Power Consumption | 250W (12V) | |||
| Magnetic Clutch | ||||
| Type | Electronic | |||
| Power Consumption | 48W (12V) | |||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.