2003 Kia Spectra Base, AutomaticFACTORY OEM SERVICE PROCEDURE

Cruise Control Module

NOTE: Cruise control module may also be referred to as cruise control unit or cruise control actuator.

Connect negative lead of voltmeter to ground. Connect positive voltmeter lead to terminals to indicated terminals and measure voltage. See Fig 1 . If voltages are not as specified, check appropriate circuit and component. See WIRING DIAGRAMSΒ  . If circuit and component are okay, replace cruise control module. See CRUISE CONTROL MODULEΒ  under REMOVAL & INSTALLATION.

Fig 1: Testing Cruise Control Module
G00285415Courtesy of KIA MOTORS AMERICA, INC.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.