Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2002 Kia Spectra Base, AutomaticFACTORY OEM SERVICE PROCEDURE
Starter Specifications
WARNING: This page is about a different car, the 2002 Isuzu Trooper. However, it is still accessible from the selected car via links, so may be relevant.
STARTER SPECIFICATIONS
| Application | Specification | |
|---|---|---|
| Armature & Commutator Core | ||
| Standard | .002" (.05 mm) | |
| Limit | .004" (.10 mm) | |
| Bushing Diameter ( In Center Bracket) | ||
| Standard | .710-.714" (18.01-18.127 mm) | |
| Limit | .715" (18.15 mm) | |
| Bushing Diameter ( In Rear Cover) | ||
| Standard | .492-.493" (12.50-12.527 mm) | |
| Limit | .496" (12.60 mm) | |
| Brush | ||
| Standard | .63" (16 mm) | |
| Limit | .43" (11 mm) | |
| Commutator Diameter | ||
| Standard | 1.30" (33.0 mm) | |
| Limit | 1.26" (32.0 mm) | |
| Commutator Mica Depth | ||
| Standard | .02-.03" (.05-.8 mm) | |
| Limit | .008" (.2 mm) | |
| No Load Test | ||
| Minimum Volts | 11 | |
| Maximum Amps | 90 | |
| Minimum RPM | 2700 | |
| Pinion Jump-Out | ||
| Dimension | .002-.06" (.05-1.5 mm) | |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.