Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2000 Kia Spectra GSX L4-1.8LFACTORY OEM SERVICE PROCEDURE
Alignment: Testing and Inspection
Procedure
1. Set tire inflation pressures to recommended pressure, if necessary.
2. Inspect front wheel bearing play; replace bearing if necessary.
3. Inspect wheel and tire runout.
4. Inspect ball joints and steering linkage for excessive play.
5. Vehicle must be on a level surface and have no luggage or passenger load.
6. Jounce the vehicle to check operation of shock absorbers.
7. Difference in height, between left and right sides of vehicle, from center of wheel up to edge of fender must not exceed 0.39 inch (10 mm).
8. Check that fuel tank is full; radiator coolant and engine oil are at specified levels; and spare tire, jack and tools are in designated positions.
1. Set tire inflation pressures to recommended pressure, if necessary.
2. Inspect front wheel bearing play; replace bearing if necessary.
3. Inspect wheel and tire runout.
4. Inspect ball joints and steering linkage for excessive play.
5. Vehicle must be on a level surface and have no luggage or passenger load.
6. Jounce the vehicle to check operation of shock absorbers.
7. Difference in height, between left and right sides of vehicle, from center of wheel up to edge of fender must not exceed 0.39 inch (10 mm).
8. Check that fuel tank is full; radiator coolant and engine oil are at specified levels; and spare tire, jack and tools are in designated positions.
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.