2000 Kia Spectra GS, AutomaticFACTORY OEM SERVICE PROCEDURE

Wheel Alignment Specifications

WHEEL ALIGNMENT SPECIFICATION

Application Preferred Range
Sephia & Spectra
Camber (1)
Front 0 -.30 To 30
Caster (1)
Front 2.27 1.82 To 2.72
Toe-In (2)
185/65R14
Front -.11 (-2.5) -.01 To .23 (-.25 To 5.8)
Rear -.07 (-1.8) -.05 To .19 (-1.27 To 4.8)
175/70R13
Front -.10 (-.5) -.02 To .22 (-2.5 To 5.6)
Rear -.06 (-1.5) -.048 To .18 (-1.21 To 4.6)
Sportage
Camber (1)
Front .44 -.31 To 1.19
Caster (1)
Front 3.58 2.83 To 4.33
Toe-In (2)
Front .098 (2.5) 0 To .20 (0 To 5.0)
(1) Measurement in degrees.
(2) Measurement in inches (mm).
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.