Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2023 Jeep Renegade RedFACTORY OEM SERVICE PROCEDURE
Quick Lookups: Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Compressor Oil | 3.55 OZS. | 0.1 L | PAG Oil ND12 | S | |||
| Air Cond Refrigerant | 0.90 LBS. | 0.4 KG | R-1234yf | S | |||
| Automatic Transmission Fluid | 6.35 QTS. | 6 L | MOPAR ZF 8&9 Speed Automatic Transmission Fluid, or equivalent | Dry fill capacity, depending on the type and size of the internal cooler, length and inside diameter of cooler lines, or use of an auxiliary cooler may vary. Failure to use the correct fluid may affect the function or performance of the transmission. | S | ||
| Brake Fluid | N/A | N/A | MOPAR DOT 4 Brake Fluid | If MOPAR Brake Fluid DOT 4 is not available, then MOPAR Brake Fluid DOT 3, is acceptable. | S | ||
| Differential Gear Oil | Rear Drive Assembly (RDM) | 0.63 QTS. | 0.59 L | MOPAR Rear Axle/PTU Synthetic Axle Lubricant API - SAE 75W-90 | S | ||
| Engine Coolant | 8.80 QTS. | 8.32 L | MOPAR Antifreeze/Coolant 10 Year/150,000 Mile Formula OAT (Organic Additive Technology) or equivalent meeting the requirements of Chrysler Material Standard MS-12106 | Includes: heater and coolant recovery tank filled to "max" level. | S | ||
| Engine Oil | w/Filter,E6D Final Versions | 4.80 QTS. | 4.54 L | SAE 0W-20 ACEA C5 Totally Synthetic Lubricant is recommended. FIAT 9.55535-DM1 qualification. | Original lubricant: SELENIA ECO2 Contractual Technical Reference No. F049.C18. | S | |
| Engine Oil | w/Filter,E6D Versions | 4.80 QTS. | 4.54 L | SAE 0W-30 SN Plus API Certified Synthetic Engine Oil. Meeting the requirements of FCA Material Standard MS-13340 such as Mopar, Pennzoil, and Shell Helix | Original lubricant: SELENIA DIGITEK P.E. Contractual Technical Reference No. F020.B12 | S | |
| Fuel Tank | 12.70 GALS. | 48.07 L | S | ||||
| Transfer Case Fluid | Power Transfer Unit (PTU) | 0.42 QTS. | 0.39 L | MOPAR Front Axle/PTU Synthetic Axle Lubricant API - SAE 75W-90 | S | ||
| Windshield Washer Fluid | N/A | N/A | Windshield Washer Solvent only | Follow the Manufacturer's Instructions for the mixture ratio. | S | ||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.