Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
U1962-83-IMPLAUSIBILE Data Received From Engine Control Module Can Message Engine3 Integrity Error - Value Of Signal Protection Calculation Incorrect
The Scan Tool may display the description name of this Diagnostic Trouble Code differently with the following below:
| MESSAGE COUNTER CRC FAULT ON ENGINE3 FROM ENGINE CONTROL MODULE MESSAGE - VALUE OF SIGNAL PROTECTION CALCULATION INCORRECT |
The COMMUNICATION DIAGNOSTIC PROCEDURE MUST be performed before replacing any component(s) or module(s). Perform the COMMUNICATION DIAGNOSTIC PROCEDURE. Refer to COMMUNICATION DIAGNOSTIC PROCEDURE .
This DTC indicates a communication issue has occurred between the Sending control module (PCM) and the Reporting control module(s) that set this fault.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.