Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSJEEP2023GRAND WAGONEER BASEREPAIR AND DIAGNOSISMAINTENANCEPROCEDURESVEHICLE QUICK REFERENCECAPACITIES AND RECOMMENDED FLUIDSSPECIFICATIONSFLUID CAPACITIESAXLES
2023 Jeep Grand Wagoneer Base
Fluid Capacities: Axles
2023 Jeep Grand Wagoneer BaseSECTION Axles
| Description | Capacities | Type | Part Number | Global Part Number |
|---|---|---|---|---|
| Axles (Front) | ||||
| 215FD - Front Axle | 1.2 Quarts /1.1 Liters | We recommend you use MOPAR GL-5 Synthetic Axle Lubricant SAE 75W-85. | 68232947AB | 68232947GB |
| Axles (Rear) | ||||
| 260RDU - Rear Axle with Electronic Limited Slip Differential (ELSD) | 1.5 Quarts / 1.4 Liters | We recommend using Mopar® GL-5 Electronic Limited Slip Synthetic Axle Lubricant SAE 75W-85 with friction modifier. | 68232948AB | 68232948GB |
| 260RDU - Rear Axle with Mechanical Limited Slip Differential | 1.5 Quarts / 1.4 Liters | We recommend using Mopar® GL-5 Mechanical Limited Slip Synthetic Axle Lubricant SAE 75W-85 with friction modifier. | 68083381AA | 68083381GA |
|
CAUTION:
Nominal refill capacities are shown. A variation may be observed from vehicle to vehicle due to manufacturing tolerance and refill procedure. |
||||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.