Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DBβ LIVE
HOMESERVICE MANUALSJEEP2023GRAND CHEROKEE LAREDO, AWDREPAIR AND DIAGNOSISBRAKESTRACTION CONTROL(BRAKE SYSTEM CONTROL MODULE 2 (BSCM 2) - ELECTRICAL DIADNOSTICS)
2023 Jeep Grand Cherokee Laredo, AWD
(Brake System Control Module 2 (BSCM 2) - Electrical DIADNOSTICS)
2023 Jeep Grand Cherokee Laredo, AWDSECTION (Brake System Control Module 2 (BSCM 2) - Electrical DIADNOSTICS)
- DTC Troubleshooting
- B1783-00-Stop Lamp Control
- C003F-00-Wheel Speed Sensors Rotation Direction Correlation
- C0044-00-Brake Pressure Sensor 1
- C0078-00-Tire Diameter
- C008E-00 - Ecu Internal Performance
- C0501-00-Left Front Wheel Speed Sensor Range/Performance
- C0502-00-Left Front Wheel Speed Sensor Circuit Low
- C0503-00-Left Front Wheel Speed Sensor Circuit High
- C0504-00-Left Front Wheel Speed Sensor Intermittent/Erratic
- C0505-00-Left Front Wheel Speed Sensor "A" Correlation
- C0507-00-Right Front Wheel Speed Sensor Range/Performance
- C0508-00-Right Front Wheel Speed Sensor Circuit Low
- C0509-00-Right Front Wheel Speed Sensor Circuit High
- C050A-00-Right Front Wheel Speed Sensor Intermittent/Erratic
- C050B-00-Right Front Wheel Speed Sensor "A" Correlation
- C051D-00-Multi-Axis Acceleration Sensor Module "A" Missing Calibration
- C0530-00-Motor Control A Range Performance
- C0534-00-Motor Control A Supply Voltage Circuit Open
- C053D-00-Brake Pressure Sensor 1 Performance
- C0555-00-Left Front Wheel Speed Sensor Incorrect Component Installed
- C0556-00-Right Front Wheel Speed Sensor Incorrect Component Installed
- C05A3-00-Wheel Speed Sensors Supply Circuit High
- C1009-00-Brake Fluid Level Low
- C107B-00-Wheel Speed Comparative Performance
- C1239-00-Emissions Rolls Test Active
- C1260-00-Abs/ESC Dynamic Controls Disabled
- C2100-00-Battery Voltage Low
- C2101-00-Battery Voltage High
- C2102-00-System Voltage Low
- C2103-00-System Voltage High
- C2129-00-Battery Voltage
- C2202-00-Original VIN Mismatch/Missing
- C2206-00 - Vehicle Configuration Mismatch
- C2210-00 - Ecu OVERTEMPERATURE
- P0602-00-Control Module Programming Error/Not Programmed
- P0604-00-Internal Control Module Random Access Memory (Ram) Error
- P060B-00-Internal Control Module A/D Processing Performance
- P062F-00-Internal Control Module EEPROM Error
- P2534-00-Ignition Switch On/Start Position Circuit Low
- P2535-00-Ignition Switch On/Start Position Circuit High
- U0100-00-Engine Control Module -ECM-Pcm- Can Signal - Missing Message
- U0101-00-Lost Communication With TCM
- U0129-00-Lost Communication With Brake System Control Module
- U0140-00-Lost Communication With Body Control Module
- U0151-00-Lost Communication With Restraints Control Module
- U0155-00-Lost Communication With Cluster-CCN
- U015C-00-Lost Communication With Automated Driving System Control Module "A"
- U015D-00-Lost Communication With Automated Driving System Control Module "B"
- U0401-00-Implausible Data Received From ECM/Pcm "A"
- U0402-00-Implausible Data Received From TCM
- U0418-00-Implausible Data Received From Brake System Control Module 1
- U0422-00-Invalid Data Received From Body Control Module
- U0452-00-Implausible Data Received From Restraints Control Module
- U045D-00-Invalid Data Received From Automated Driving System Control Module "A"
- U045E-00-Invalid Data Received From Automated Driving System Control Module "B"
- U104E-00-High Speed FD-Can2 Communication Bus Performance
- U1070-00-High Speed FD-Can14 Communication Bus Performance
- U140E-00-Implausible Vehicle Configuration Data Received
- Standard Procedure
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.