2023 Jeep Gladiator Freedom, Full Time T/Case ControlFACTORY OEM SERVICE PROCEDURE

Module Programming

Pre-June 7th 2021 BuildΒ  Vehicles built prior to June 7th will be equipped with a Tire Pressure Monitoring System (TPMS) Module.

Post-June 7th 2021 BuildΒ  The Tire Pressure Monitoring system for vehicles built after June 7th 2021 is integrated by the Radio Frequency Hub (RF Hub). A "Dummy" TPMS module may be installed with the purpose of being a pass-through for the CAN communication lines. The "Dummy" TPMS module cannot be communicated with and is not a factor in the Tire Pressure Monitoring. The programming will reside within the RF-Hub for these models.

Using special tool (special tool #2046300080, Kit, TPM/RKE ANALYZER) and the scan tool, navigate to the TPM system module and then its "Miscellaneous Functions" menu to select and perform the following procedures:

  1. Program Left Front Tire Sensor ID
  2. Program Left Rear Tire Sensor ID
  3. Program Right Front Tire Sensor ID
  4. Program Right Rear Tire Sensor ID
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.