Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSJEEP2023COMPASS REDREPAIR AND DIAGNOSISQUICK LOOKUPSDTC INDEXDTC INDEX (1 OF 2)MODULE, DUAL CLUTCH SELECTOR (DCSM)
2023 Jeep Compass Red
Module, Dual Clutch Selector (DCSM)
2023 Jeep Compass RedSECTION Module, Dual Clutch Selector (DCSM)
DIAGNOSTIC CODE INDEX
| DTC | Description |
|---|---|
| P0562-00 | SYSTEM VOLTAGE LOW |
| P0563-00 | SYSTEM VOLTAGE HIGH |
| P0606-00 | CONTROL MODULE PROCESSOR |
| P0607-00 | CONTROL MODULE PERFORMANCE |
| P060A-00 | INTERNAL CONTROL MODULE MONITORING PROCESSOR PERFORMANCE |
| P0814-00 | TRANSMISSION RANGE DISPLAY CIRCUIT |
| P081C-00 | PARK INPUT CIRCUIT |
| P0914-00 | GEAR SHIFT POSITION CIRCUIT LIGHT FAULT |
| P0919-00 | GEAR SHIFT POSITION CONTROL ERROR HEAVY FAULT |
| P0928-00 | GEAR SHIFT LOCK SOLENOID-ACTUATOR CONTROL CIRCUIT A-OPEN |
| P0929-00 | GEAR SHIFT LOCK SOLENOID-ACTUATOR CONTROL CIRCUIT A RANGE-PERFORMANCE |
| P0955-00 | AUTO SHIFT MANUAL MODE CIRCUIT GENERAL ELECTRICAL FAILURE |
| P1C73-00 | PARK SWITCH CIRCUIT STUCK |
| P1C82-00 | AUTO SHIFT MANUAL MODE CIRCUIT SIGNAL STUCK |
| U0001-00 | DUAL CLUTCH SHIFTER MODULE DCSM CAN COMMUNICATION BUS BUS OFF |
| U0002-00 | DUAL CLUTCH SHIFTER MODULE DCSM CAN COMMUNICATION BUS PERFORMANCE NODE MUTE |
| U0100-00 | LOST COMMUNICATION WITH ECM/PCM |
| U0101-00 | LOST COMMUNICATION WITH DCTM |
| U0155-00 | LOST COMMUNICATION WITH INSTRUMENT PANEL CLUSTER IPC CONTROL MODULE |
| U0401-00 | INVALID DATA RECEIVED FROM ECM PCM A |
| U0402-00 | INVALID DATA RECEIVED FROM DCTM |
| U0422-00 | INVALID DATA RECEIVED FROM BODY CONTROL MODULE |
| U0423-00 | INVALID DATA RECEIVED FROM INSTRUMENT PANEL CLUSTER CONTROL |
| U1400-00 | LOST COMMUNICATION WITH BODY CONTROL MODULE |
| U1701-00 | ENGINE1 (FROM ENGINE CONTROL MODULE) MISSING MESSAGE |
| U1930-00 | DCSM_OPERATIONALMODESTS SNA PLAUSIBILITY |
| U1932-00 | BCM_COMMAND OPERATIONALMODESTS (SNA) PLAUSIBILITY |
| U1933-00 | BCM_COMMAND (FROM BODY CONTROL MODULE) MISSING MESSAGE |
| U1934-00 | BCM_COMMAND FROM BCM AND BODY2 FROM BCM MISSING MESSAGE |
| U193C-00 | BCM_COMMAND (FROM BCM) AND ENGINE1 (FROM ECM) MISSING MESSAGE |
| U1950-00 | BCM COMMAND (FROM BODY CONTROL MODULE) MESSAGE CRC OR MESSAGE COUNTER FAULT |
| U1960-00 | ENGINE1 FROM ENGINE CONTROL MODULE MESSAGE CRC OR MESSAGE COUNTER FAULT |
| U197C-00 | TRANSM2 FROM TRANSMISSION CONTROL MODULE MESSAGE CRC OR MESSAGE COUNTER FAULT |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.