Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSJEEP2023COMPASS LIMITEDREPAIR AND DIAGNOSIS (SINGLE PAGE)QUICK LOOKUPSDTC INDEXDTC INDEX (1 OF 2)MODULE, CENTRAL VISION PROCESSING (CVPM)
2023 Jeep Compass Limited
Module, Central Vision Processing (CVPM)
2023 Jeep Compass LimitedSECTION Module, Central Vision Processing (CVPM)
DIAGNOSTIC CODE INDEX
| DTC | Description |
|---|---|
| B217A-1C | REAR CAMERA-CIRCUIT VOLTAGE OUT OF RANGE |
| B217A-92 | REAR CAMERA-PERFORMANCE OR INCORRECT OPERATION |
| B2199-16 | BATTERY VOLTAGE - CIRCUIT VOLTAGE BELOW THRESHOLD |
| B2199-17 | BATTERY VOLTAGE-CIRCUIT VOLTAGE ABOVE THRESHOLD |
| B21DD-84 | SYSTEM VOLTAGE-SIGNAL BELOW ALLOWABLE RANGE |
| B21DD-85 | SYSTEM VOLTAGE-SIGNAL ABOVE ALLOWABLE RANGE |
| B222E-00 | FLASH CHECKSUM PERFORMANCE |
| B223B-00 | VEHICLE CONFIGURATION MISMATCH |
| B2286-00 | CALIBRATION NOT LEARNED-LOST CALIBRATION |
| B22A9-00 | ECU INTERNAL PERFORMANCE |
| B23C5-1C | FRONT CAMERA-CIRCUIT VOLTAGE OUT OF RANGE |
| B23C5-92 | FRONT CAMERA-PERFORMANCE OR INCORRECT OPERATION |
| B23C6-1C | LEFT CAMERA-CIRCUIT VOLTAGE OUT OF RANGE |
| B23C6-92 | LEFT CAMERA-PERFORMANCE OR INCORRECT OPERATION |
| B23C7-1C | RIGHT CAMERA-CIRCUIT VOLTAGE OUT OF RANGE |
| B23C7-92 | RIGHT CAMERA-PERFORMANCE OR INCORRECT OPERATION |
| U0010-00 | CAN INTERIOR BUS |
| U0140-00 | LOST COMMUNICATION WITH BODY CONTROL MODULE |
| U0184-00 | LOST COMMUNICATION WITH RADIO |
| U0264-00 | LOST COMMUNICATION WITH CAMERA MODULE-REAR |
| U0265-00 | LOST COMMUNICATION WITH FRONT CAMERA |
| U0266-00 | LOST COMMUNICATION WITH LEFT CAMERA |
| U0267-00 | LOST COMMUNICATION WITH RIGHT CAMERA |
| U0422-00 | INVALID DATA RECEIVED FROM BODY CONTROL MODULE |
| U0485-00 | IMPLAUSIBLE DATA RECEIVED FROM RADIO |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.