Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
2023 Jeep Compass High Altitude
Quick Lookups: Fluids
2023 Jeep Compass High AltitudeSECTION Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Compressor Oil | 3.00 OZS. | 0.08 L | PAG Oil ND12 | S | |||
| Air Cond Refrigerant | 1.06 LBS. | 0.48 KG | R-1234yf | S | |||
| Automatic Transmission Fluid | Service Fill | 8.56 QTS. | 8.1 L | MOPAR ZF 8&9 Speed Automatic Transmission Fluid | S | ||
| Automatic Transmission Fluid | Total Capacity | 8.71 QTS. | 8.24 L | MOPAR ZF 8&9 Speed Automatic Transmission Fluid | S | ||
| Brake Fluid | N/A | N/A | MORAR Brake Fluid DOT 4 | If MOPAR Brake Fluid DOT 4 is not available, then MOPAR Brake Fluid DOT 3, is acceptable. | S | ||
| Differential Gear Oil | Rear Drive Assembly (RDA) | 0.63 QTS. | 0.59 L | MOPAR Rear Axle/RDM Synthetic Axle Lubricant SAE 75W-90 API - GL-5 | S | ||
| Engine Coolant | 9.00 QTS. | 8.51 L | MOPAR Antifreeze/Coolant 10 Year/150,000 Mile Formula OAT (Organic Additive Technology) or equivalent meeting the requirements of Chrysler Material Standard MS-12106 | Includes: heater and coolant recovery tank filled to "max" level. | S | ||
| Engine Oil | w/Filter | 5.00 QTS. | 4.73 L | API - SP/GF-6A SAE 5W-30 Full Synthetic Engine Oil which meets the requirements of the manufacturer Material Standards MS-13340. | S | ||
| Fuel Tank | 13.50 GALS. | 51.1 L | S | ||||
| Transfer Case Fluid | Power Transfer Unit (PTU) | 0.42 QTS. | 0.39 L | MOPAR PTU Synthetic Lubrican SAE 75W-90 API - GL-5 | S | ||
| Windshield Washer Fluid | N/A | N/A | Windshield Washer Solvent only | Follow the Manufacturer's Instructions for the mixture ratio. | S | ||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.