Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSJEEP2023CHEROKEE TRAILHAWKREPAIR AND DIAGNOSISRESTRAINTSPASSIVE RESTRAINTSRESTRAINTS SYSTEM (SERVICE INFORMATION)TECHNICAL SPECIFICATIONSTORQUE SPECIFICATIONS
2023 Jeep Cherokee Trailhawk
Torque Specifications
2023 Jeep Cherokee TrailhawkSECTION Torque Specifications
TORQUE SPECIFICATIONS
| DESCRIPTION | N.m | Ft. Lbs. | In. Lbs. | COMMENT |
|---|---|---|---|---|
| B-Pillar Impact Sensor Nut | 11 | 8 | - | |
| C-Pillar Impact Sensor Nut | 11 | 8 | - | |
| Front Seat Belt Anchor to Body Bolt | 40 | 30 | - | |
| Front Door Impact Pressure Sensor Screw | 11 | 8 | - | |
| Front Impact Sensor Screw | 9 | - | 80 | |
| Front Seat Belt Anchor Tensioner Bolt to B-Pillar | 40 | 30 | - | |
| Front Seat Belt Height Adjuster Bolts | 45 | 33 | - | |
| Front Seat Belt Buckle to Seat Bolt | 45 | 33 | - | |
| Front Seat Belt Retractor Bolt to B-Pillar | 45 | 33 | - | |
| Front Seat Belt Turning Loop Nut | 41 | 30 | - | |
| Front Seat Airbag Nuts | 10 | - | 89 | |
| Knee Airbag to Instrument Panel (IP) Nuts | 9 | - | 80 | |
| Occupant Restraints Controller (ORC) Nuts | 9 | - | 80 | |
| Passenger Side Airbag to IP Screws | 9 | - | 80 | |
| Rear Seat Belt Turning Loop Bolt | 55 | 41 | - | |
| Rear Center Seat Belt Anchor and Left Seat Buckle Nut to Floor | 38 | 28 | - | |
| Rear Seat Buckle to Seat | 44 | 32 | - | |
| Rear Outboard Retractor Anchor Nut to Floor | 55 | 41 | - | |
| Rear Center Seat Belt Anchor Bolt to Lower Seat Frame | 45 | 33 | - | |
| Rear Center Seat Belt Retractor to Seat Frame Bolt | 45 | 31 | ||
| Rear Outboard Retractor Bolt | 45 | 33 | - | |
| Rear Seat Belt Anchor to Floor Bolt | 44 | 32 | - | |
| Side Airbag Inflatable Curtain A-Pillar Tether Nuts | 7 | - | 62 | |
| Side Airbag Inflatable Curtain Screws to Roof Rail | 7 | - | 62 |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.