Quick Lookups: Fluids

2023 Jeep Cherokee TrailhawkSECTION Fluids
FLUID CAPACITIES
Fluid Type Application Standard Metric Fluid Spec Note S/H
Air Cond Compressor Oil 2.0L Eng 4.10 OZS. 0.12 L FD46XG S
Air Cond Refrigerant 2.0L Eng w/R-1234yf 0.88 LBS. 0.39 KG R-1234yf S
Air Cond Refrigerant 2.0L Eng w/R-134a 1.06 LBS. 0.48 KG R-134a S
Automatic Transmission Fluid 6.35 QTS. 6 L MOPAR ZF 8&9 Speed Automatic Transmission Fluid S
Brake Fluid N/A N/A MORAR Brake Fluid DOT 3, SAE J1703 If MOPAR Brake Fluid DOT 3 is not available, then MOPAR Brake and Clutch Fluid DOT 4 is acceptable. S
Differential Gear Oil One Speed Rear Differential N/A N/A 70W-80 Gear Lube As required. S
Differential Gear Oil Two Speed Rear Differencial,w/Locker 1.30 QTS. 1.23 L 70W-80 Gear Lube Plus Synthetic Hydraulic Control Fluid - 0.46 qts. in with the 70W-80 Gear lube. S
Differential Gear Oil Two Speed Rear Differencial,w/o Locker 1.22 QTS. 1.15 L 70W-80 Gear Lube Plus Synthetic Hydraulic Control Fluid - 0.46 qts. in with the 70W-80 Gear lube. S
Engine Coolant 2.0L Eng 10.00 QTS. 9.46 L MOPAR Antifreeze/Coolant 10 Year/150,000 Mile Formula OAT (Organic Additive Technology) or equivalent meeting the requirements of Chrysler Material Standard MS-12106 Includes: heater and coolant recovery tank filled to "max" level. S
Engine Oil 2.0L Eng w/Filter 5.00 QTS. 4.73 L API - SN/PLUS SAE 5W-30 Full Synthetic Engine Oil which meets the requirements of FCA Material Standards MS-13340. S
Fuel Tank 15.80 GALS. 59.8 L S
Transfer Case Fluid 2 Spd T/Case Power Transfer Unit (PTU) 1.06 QTS. 1 L MOPAR PTU Synthetic Lubrican SAE 75W-90 API - GL-5 S
Windshield Washer Fluid N/A N/A Windshield Washer Solvent only Follow the Manufacturer's Instructions for the mixture ratio. S
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.