WARNING: This page is about a different car, the 2021 Jeep Compass. However, it is still accessible from the selected car via links, so may be relevant.

The Immobilizer Component Replacement guide has been modified to list all of the Immobilizer related procedures, found in wiTECH, listed by priority. starting with the most important procedure first, along with an "X" to indicate when it is necessary to run this procedure.

PASSIVE ENTRY VEHICLES

PRIORITY	PROCEDURE NAME	BCM	ECM	ESL	FOBIKs	RFH
1 (NAFTA)	Restore BCM Proxi	X
1 (ROW)	Restore Vehicle Configuration	X
2	RFH Replace					X
3	Disable KEYs/ FOBIKs					X
4	Program Ignition FOBIKs				X
5	BCM Replace	X
6 (NAFTA)	PCM/ECM/ESL Replaced		X	X
6 (ROW)	Transfer secret key to ESL /		X	X
7	PROXI Alignment	X	X	X		X
8	ECU Specific Procedures	X	X	X		X

MECHANICAL KEY VEHICLES

PRIORITY	PROCEDURE NAME	BCM	ECM	ESL	KEYS
1 (NAFTA)	Restore BCM Proxi Configuration	X
1 (ROW)	Restore Vehicle Configuration	X
2	BCM Replace	X
3	Program Keys				X
4 (NAFTA)	PCM/ECM/ESL Replaced		X	X
4 (ROW)	Transfer secret key to ESL / ECM		X	X
5	PROXI Alignment	X	X	X
6	ECU Specific Procedures	X	X	X

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.

• Brakes feel soft, pull hard to one side, or make grinding noises.

• The engine overheats, stalls repeatedly, or misfires under load.

• You are missing required tools, torque specs, or safe lifting equipment.

• You are not confident in the next step or safety outcome.

Safety Warning

Module Replacement Guide (RF-Hub, Pcm, BCM, ESL)

Use the Manual With the Right Hardware

When to See a Mechanic