Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2022 Jeep Compass Altitude, FWDFACTORY OEM SERVICE PROCEDURE
Quick Lookups: Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Compressor Oil | 3.00 OZS. | 0.08 L | PAG Oil ND12 | S | |||
| Air Cond Refrigerant | w/R-1234yf | 1.06 LBS. | 0.48 KG | R-1234yf | S | ||
| Air Cond Refrigerant | w/R-134a | 1.25 LBS. | 0.56 KG | R-134a | S | ||
| Automatic Transmission Fluid | Trans Mfr CD F21-250 | 6.60 QTS. | 6.24 L | MOPAR Automatic Transmission Fluid AW-1 | S | ||
| Brake Fluid | N/A | N/A | MORAR Brake Fluid DOT 3, SAE J1703 | If MOPAR Brake Fluid DOT 3 is not available, then MOPAR Brake Fluid DOT 4, is acceptable. | S | ||
| Differential Gear Oil | Rear Drive Assembly (RDA) | 0.63 QTS. | 0.59 L | MOPAR Rear Axle/RDM Synthetic Axle Lubricant SAE 75W-90 API - GL-5 | S | ||
| Engine Coolant | 6.80 QTS. | 6.43 L | MOPAR Antifreeze/Coolant 10 Year/150,000 Mile Formula OAT (Organic Additive Technology) or equivalent meeting the requirements of Chrysler Material Standard MS-12106 | Includes: heater and coolant recovery tank filled to "max" level. | S | ||
| Engine Oil | w/Filter | 5.50 QTS. | 5.2 L | API - SAE 0W-20 Full Synthetic Engine Oil | S | ||
| Fuel Tank | 15.90 GALS. | 60.18 L | S | ||||
| Power Steering Fluid | N/A | N/A | MOPAR Automatic Transmission Fluid Plus 4 or equivalent licensed ATF+4 product | If MOPAR Power Steering Fluid +4 is not available, then MOPAR ATF +4 Automatic Transmission Fluid (P/N 05166226AA), is acceptable. | S | ||
| Transfer Case Fluid | Power Transfer Unit (PTU) | 0.42 QTS. | 0.39 L | MOPAR PTU Synthetic Lubrican SAE 75W-90 API - GL-5 | S | ||
| Windshield Washer Fluid | N/A | N/A | Windshield Washer Solvent only | Follow the Manufacturer's Instructions for the mixture ratio. | S | ||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.