Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2021 Jeep Renegade TrailhawkFACTORY OEM SERVICE PROCEDURE
Module, Trailer Tow
DIAGNOSTIC CODE INDEX
| DTC | Description |
|---|---|
| B1000-96 | ELECTRONIC CONTROL UNIT - COMPONENT INTERNAL FAILURE |
| C1005-11 | TURN LEFT LIGHT COMMAND - CIRCUIT SHORT TO GROUND |
| C1005-12 | TURN LEFT LIGHT COMMAND - CIRCUIT SHORT TO BATTERY |
| C1005-13 | TURN LEFT LIGHT COMMAND - CIRCUIT OPEN |
| C1006-11 | TURN RIGHT LIGHT COMMAND - CIRCUIT SHORT TO GROUND |
| C1006-12 | TURN RIGHT LIGHT COMMAND - CIRCUIT SHORT TO BATTERY |
| C1006-13 | TURN RIGHT LIGHT COMMAND - CIRCUIT OPEN |
| C104B-11 | REAR FOG LIGHT COMMAND-CIRCUIT SHORT TO GROUND |
| C104B-12 | REAR FOG LIGHT COMMAND-CIRCUIT SHORT TO BATTERY |
| C104B-13 | REAR FOG LIGHT COMMAND-CIRCUIT OPEN |
| C104C-11 | REVERSE LIGHT COMMAND - CIRCUIT SHORT TO GROUND |
| C104C-12 | REVERSE LIGHT COMMAND - CIRCUIT SHORT TO BATTERY |
| C104C-13 | REVERSE LIGHT COMMAND-CIRCUIT OPEN |
| C104D-11 | POSITION RIGHT LIGHT COMMAND - CIRCUIT SHORT TO GROUND |
| C104D-12 | POSITION RIGHT LIGHT COMMAND - CIRCUIT SHORT TO BATTERY |
| C104D-13 | POSITION RIGHT LIGHT COMMAND - CIRCUIT OPEN |
| C104E-11 | POSITION LEFT LIGHT COMMAND - CIRCUIT SHORT TO GROUND |
| C104E-12 | POSITION LEFT LIGHT COMMAND - CIRCUIT SHORT TO BATTERY |
| C104E-13 | POSITION LEFT LIGHT COMMAND - CIRCUIT OPEN |
| C104F-64 | TRAILER CONNECTED STATUS - SIGNAL PLAUSIBILITY FAILURE |
| C105B-64 | TURN LIGHT REAR LEFT - SIGNAL PLAUSIBILITY FAILURE |
| C105C-64 | TURN LIGHT REAR RIGHT - SIGNAL PLAUSIBILITY FAILURE |
| C105D-8F | VEHICLE SPEED ERROR - ERRATIC |
| C106D-11 | STOP LEFT/RIGHT LIGHT COMMAND - CIRCUIT SHORT TO GROUND |
| C106D-12 | STOP LEFT/RIGHT LIGHT COMMAND - CIRCUIT SHORT TO BATTERY |
| C106D-13 | STOP LEFT/RIGHT LIGHT COMMAND - CIRCUIT OPEN |
| U0010-87 | BH CAN-MISSING MESSAGE |
| U0010-88 | BH CAN-BUS OFF |
| U1700-86 | BCM BODY COMPUTER MODULE - SIGNAL INVALID |
| U1700-87 | BCM BODY COMPUTER MODULE - MISSING MESSAGE |
| U1703-86 | IPC INSTRUMENT PANEL CLUSTER-SIGNAL INVALID |
| U1703-87 | IPC INSTRUMENT PANEL CLUSTER-MISSING MESSAGE |
| U1930-86 | INTERNAL IGNITION WORKING CONDITION SIGNAL-SIGNAL INVALID |
| U1932-86 | IGNITION WORKING CONDITION SIGNAL FROM BODY COMPUTER MODULE-SIGNAL INVALID |
| U1933-87 | STATUS_BH_BCM1-MISSING MESSAGE |
| U1934-87 | STATUS_CCAN3-MISSING MESSAGE |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.