2021 Jeep Gladiator Mojave, Part Time T/Case Control, Automatic TransFACTORY OEM SERVICE PROCEDURE

Torque Specification

GC0205920Courtesy of CHRYSLER GROUP, LLC
TORQUE SPECIFICATIONS - STEERING PUMP

CALLOUT DESCRIPTION SPECIFICATION COMMENT
1 Pressure Line to Pump Bolt 20 N. m (15 Ft. Lbs.)Β  -
2 Power Steering Pump to Bracket Bolts 8 N. m (71 In. Lbs.)Β  -
3 Power Steering Pump Bracket Frame Bolts 29 N. m (21 Ft. Lbs.)Β  -
4 Power Steering Fluid Reservoir Bolt 8 N. m (71 In. Lbs.)Β  -
5 Power Steering Hose Routing Bracket Bolt 5 N. m (44 In. Lbs.)Β  -
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.