2021 Jeep Compass TrailhawkFACTORY OEM SERVICE PROCEDURE

Diagnosis And Testing: Introduction

Engine diagnosis is helpful in determining the causes of malfunctions not detected and remedied by routine maintenance.

These malfunctions may be classified as either mechanical (e.g., a strange noise), or performance (e.g., engine idles rough and stalls).

For Engine Performance diagnosis. Refer to ENGINE PERFORMANCE DIAGNOSTIC TABLEΒ .

For Engine Mechanical diagnosis. Refer to ENGINE MECHANICAL DIAGNOSTIC TABLEΒ .

For Fuel Delivery system diagnosis. Refer to FUEL DELIVERY, GAS, DIAGNOSIS AND TESTING .

For Cooling System diagnosis. Refer to DIAGNOSIS AND TESTING .

For Engine Lubrication System diagnosis. Refer to ENGINE LUBRICATION DIAGNOSTIC TABLEΒ .

Additional tests and diagnostic procedures may be necessary for specific engine malfunctions that cannot be isolated with the Service Diagnosis tables. Information concerning additional tests and diagnosis is provided within the following:

  • Cylinder Compression Pressure Test
  • Cylinder Combustion Pressure Leakage Test
  • Cylinder Head Gasket Leakage Diagnosis
  • Mechanical Valve Tappet Noise Diagnosis
  • Exhaust System leak testing
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.