Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Retractor, Seat Belt: Description
The seat belt retractors used in all seating positions include an inertia-type, Emergency Locking Retractor (ELR) mechanism as standard equipment. However, the ELR for all seating positions except the driver side front are mechanically switchable from an ELR to an Automatic Locking Retractor (ALR). Both front seat belt retractors also include a seat belt tensioner feature and an adaptive load limiting feature. Refer to TENSIONER, SEAT BELT, DESCRIPTIONΒ .
The ELR mechanism, the ALR mechanism, the tensioner mechanism and the adaptive load limiting feature are all integral to the seat belt and retractor unit and are concealed beneath molded plastic covers located on the sides of the retractor spool. These features cannot be adjusted or repaired and if ineffective, damaged or deployed, the entire seat belt and retractor unit must be replaced.
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.
