2021 Jeep Cherokee TrailhawkFACTORY OEM SERVICE PROCEDURE

Navigation/Telecommunication (Service Information): Microphone: Installation

GC0176926Courtesy of CHRYSLER GROUP, LLC
  1. Insert the microphone wire harness connector pigtail (1) through the headliner and connect the pigtail to the headliner wire harness connector.
  2. Install the microphone in the headliner. Be certain the microphone is flush with the surface of the headliner and the retaining tabs (2) are securely in position.
  3. Install the headliner. Refer to HEADLINER, INSTALLATION .
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.