Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2020 Jeep Gladiator Altitude, Automatic TransFACTORY OEM SERVICE PROCEDURE
Torque Specifications
TORQUE SPECIFICATIONS
| DESCRIPTION | N.m | Ft. Lbs. | In. Lbs. | Comments |
|---|---|---|---|---|
| Steering Wheel Nut | 50 | 37 | - | Do not reuse these fasteners. If removed, a new fastener must be installed and tightened to specifications. |
| Steering Column Nuts | 27 | 20 | - | |
| Intermediate Shaft Coupler Upper Pinch Bolts | 34 | 25 | - | Do not reuse these fasteners. If removed, a new fastener must be installed and tightened to specifications. |
| Intermediate Shaft Coupler Lower Pinch Bolts | 54 | 40 | - | Do not reuse these fasteners. If removed, a new fastener must be installed and tightened to specifications. |
| Bulkhead Bearing Bolt | 9 | 7 | - |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.