Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Capacities And Recommended Fluids: Specifications
| Description | Capacities | Type | Part Number | Global Part Number |
|---|---|---|---|---|
| Engine Oil With Filter | 5 Quarts / 4.73 Liters | We recommend you use API Certified SAE 0W-20 Engine Oil, meeting the requirements of FCA Material Standard MS-6395 such as Mopar, Pennzoil, and Shell Helix. Refer to your engine oil filler cap for correct SAE grade. | 68218950AB | 68218950GA |
| Cooling System * | 11.2 Quarts / 10.6 Liters | We recommend you use MOPAR Antifreeze/Coolant 10 Year/150000 Mile Formula OAT (Organic Additive Technology) or equivalent meeting the requirements of Material Standard MS.90032. | 68163848AB | 68218041GA |
| Fuel Selection | 22 Gallons / 83 Liters | 87 Octane (R+M)/2 Method, 0-15% Ethanol. | - | - |
| Spark Plugs | GAP | We recommend you use MOPAR Spark Plugs. | - | - |
| 0.043 in / 1.1 mm | ||||
| * Includes heater and coolant reservoir filled to MAX level. | ||||
| Description | Charge Amounts | Type | Part Number | Global Part Number | |
|---|---|---|---|---|---|
| Refrigerant | 1.06 Pounds / 482 Grams | Use only refrigerant R-1234yf | 68224028AA | 68224028GA | |
| Refrigerant Oil | - | FD46XG | 05114554AC | 05114554GC | |
| Refrigerant Oil | 5.0 oz / 150 ml | Total System Fill | - | - | |
| Refrigerant Oil | 2.0 oz / 60 ml | A/C Condenser | - | - | |
| Refrigerant Oil | 2.0 oz / 60 ml | A/C Evaporator | - | - | |
| Refrigerant Oil | 1.0 oz / 30 ml | A/C Receiver/Dryer | - | - | |
| Refrigerant Oil | Refer to OIL, REFRIGERANT, STANDARD PROCEDURE . | A/C Compressor | - | - | |
| Description | Capacities | Type | Part Number | Global Part Number |
|---|---|---|---|---|
| Automatic | ||||
| 8HP50 | 9.5 Quarts/9 Liters | Use only Mopar ZF 8&9 Speed ATF Automatic Transmission Fluid or equivalent. Failure to use the correct fluid may affect the function or performance of your transmission. | 68218925AA | 68218925GA |
| Manual | ||||
| AL6 | 4.76 Pints/2.25 Liters | We recommend you use Mopar ATF+4 Automatic Transmission Fluid. | 68218057AB | 68218057GC |
| Dry fill capacity. Depending on type and size of internal cooler, length and inside diameter of cooler lines, or use of an auxiliary cooler, these figures may vary. Refer to the appropriate service information for the correct procedures. | ||||
| Approximate dry fill or fill to bottom edge of fill plug hole. | ||||
|
CAUTION:
Nominal refill capacities are shown. A variation may be observed from vehicle to vehicle due to manufacturing tolerance and refill procedure. |
||||
| Description | Capacities | Type | Part Number | Global Part Number |
|---|---|---|---|---|
| MP1622/MP1622-OR | 3.38 Pints/1.6 Liters | We recommend you use Mopar ATF+4 Automatic Transmission Fluid. | 68218057AB | 68218057GB |
| MP3022C/MP3022C-OR | 3.72 Pints/1.76 Liters | We recommend you use Mopar ATF+4 Automatic Transmission Fluid. | 68218057AB | 68218057GB |
| Approximate dry fill or fill to bottom edge of fill plug hole. | ||||
|
CAUTION:
Nominal refill capacities are shown. A variation may be observed from vehicle to vehicle due to manufacturing tolerance and refill procedure. |
||||
| Description | Capacities | Type | Part Number | Global Part Number |
|---|---|---|---|---|
| Axles (Front) | ||||
| 210 FBI (Model 44) - Front Axle | 2.18 Pints/1.03 Liters | We recommend you use Mopar Gear & Axle Lubricant (SAE 75W85) (API GL-5). | 68378949AA | 68378949GA |
| Axles (Rear) | ||||
| 220 RBI (Model 44) Rear Axle - Electronic Locker | 3.06 Pints/1.45 Liters | We recommend you use Mopar Gear & Axle Lubricant (SAE 75W85) (API GL-5). | 68378949AA | 68378949GA |
| / 220 RBI (Model 44) Rear Axle - Limited Slip | 2.87 Pints/1.36L Liters | We recommend you use Mopar Gear & Axle Lubricant (SAE 75W85) (API GL-5). Models equipped with Trac-Lok Limited Slip Differential require a friction modifier additive. | 68378949AA | 68378949GA |
| Chassis Systems | ||||
| Brake Master Cylinder | N/A | We recommend you use MOPAR DOT 3 Brake Fluid, SAE J1703. If DOT 3, SAE J1703 brake fluid is not available, then DOT 4 is acceptable. | 04318080AD | 04318080GD |
| Clutch Master Cylinder | N/A | We recommend you use MOPAR DOT 3 Brake Fluid, SAE J1703. If DOT 3, SAE J1703 brake fluid is not available, then DOT 4 is acceptable. | 04318080AD | 04318080GD |
| Power Steering Reservoir | N/A | We recommend you use MOPAR Electric Steering Pump Fluid | 68088485AB | 68088485GB |
| Limited-Slip Rear Axles require the addition of 70 ml (2.37 oz.) MOPAR® Limited Slip Additive. | ||||
| If equipped with Trailer Tow package use MOPAR® Synthetic Gear Lubricant, SAE 75W-140 (04874469AA) | ||||
|
CAUTION:
Nominal refill capacities are shown. A variation may be observed from vehicle to vehicle due to manufacturing tolerance and refill procedure. |
||||
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
No obligation. See pricing before you book.