Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2020 Jeep Compass Altitude, Eng CD ED6FACTORY OEM SERVICE PROCEDURE
Torque Specification Diesel
TORQUE SPECIFICATION DIESEL
| DESCRIPTION | N.m | Ft. Lbs. | In. Lbs. | COMMENTS |
|---|---|---|---|---|
| Duplex Pipe | 9 | - | 80 | |
| EGR Air Flow Control Valve 1.6L Diesel | 25 | 18 | - | |
| EGR Air Flow Control Valve 2.0L Diesel | 9 | - | 80 | |
| EGR Complete Assembly Connecting Pipes | 25 | 18 | - | |
| EGR Cooler Bolt | 10 | - | 89 | |
| EGR Solenoid | 6 10 |
- - |
53 89 |
|
| EGR Temperature Sensor | 50 | 37 | - | |
| Front-end Reinforcement Bracket | 6 10 |
- - |
53 89 |
|
| M6 Bolts | 10 | - | 89 | |
| M8 Bolts | 20 | 15 | - | |
| High Pressure EGR Solenoid | 25 | 18 | - | |
| High Pressure EGR Solenoid | ||||
| Low Pressure EGR Valve Support Bolt | 9 | - | 80 | |
| Low Pressure EGR Valve Bolt | 9 | - | 80 | |
| Low Pressure EGR Valve Cooler Nut | 9 | - | 80 | |
| High Pressure EGR Valve Support | 25 | 18 | - |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.