2019 Jeep Compass Altitude, Eng CD ED6FACTORY OEM SERVICE PROCEDURE

Capacities And Recommended Fluids: Specifications

1.4L ENGINE

Description Capacities Type Part Number Global Part Number
Engine Oil With Filter 4 Quarts / 3.8 Liters We recommend you use 0W-30 ACEA C2 - FCA 9.55535-GS1 synthetic engine oil. 68291576AA N/A
Cooling System (1) 5.5 Quarts / 5.2 Liters We recommend you use MOPAR Antifreeze/Coolant 10 Year/150, 000 Mile Formula OAT (Organic Additive Technology) or equivalent meeting the requirements of Material Standard MS.90032. 68163848AB 68163848GB
Fuel Selection 15.9 Gallons / 60 Liters Minimum 91 Research Octane Number (RON) - -
Spark Plugs GAP We recommend you use MOPAR Spark Plugs. - -
N/A - -
(1) Includes heater and coolant reservoir filled to MAX level.
1.6L DIESEL ENGINE

Description Capacities Type Part Number Global Part Number
Engine Oil With Filter - With AdBlue 5.07 Quarts / 4.8 Liters For best performance and maximum protection under all types of operating conditions, the manufacturer recommends SELENIA WR FORWARD engine oils, or equivalent, API Certified SAE 0W-20 that meet the requirements of FCA Material Standard 9.55535-DSX and ACEA C2.
NOTE:

  • If lubricants compliant with the required specifications are not available, products that comply with the minimum required characteristics can be used for topping off; in this case optimal performance of the engine is not guaranteed.
  • The use of products with specifications other than those indicated above could cause damage to the engine not covered by the warranty.

 N/A N/A
Engine Oil With Filter - Without AdBlue 5.07 Quarts / 4.8 Liters For best performance and maximum protection under all types of operating conditions, the manufacturer recommends SELENIA WR FORWARD engine oils, or equivalent, API Certified SAE 0W-30 that meet the requirements of FCA Material Standard 9.55535-DS1 or MS.90047 and ACEA C2.
NOTE:

  • If lubricants compliant with the required specifications are not available, products that comply with the minimum required characteristics can be used for topping off; in this case optimal performance of the engine is not guaranteed.
  • The use of products with specifications other than those indicated above could cause damage to the engine not covered by the warranty.

 N/A 68291576GA
Cooling System (1) 6.4 Quarts / 6.1 Liters We recommend you use MOPAR Antifreeze/Coolant 10 Year/150, 000 Mile Formula OAT (Organic Additive Technology) or equivalent meeting the requirements of Material Standard MS.90032. 68163848AB 68163848GB
Cooling System (1) 6.4 Quarts / 6.1 Liters We recommend you use MOPAR Antifreeze/Coolant 10 Year/150, 000 Mile Formula OAT (Organic Additive Technology) or equivalent meeting the requirements of Material Standard MS.90032. 68163848AB 68163848GB
Fuel Selection 15.9 Gallons / 60 Liters EN590 - -
AdBlue (UREA) Fluid Tank 3.4 Gallons / 13 Liters AdBlue (Urea-Water Solution) According To DIN 70 070 and ISO 22241-1 - -
(1) Includes heater and coolant reservoir filled to MAX level.
2.0L DIESEL ENGINE

Description Capacities Type Part Number Global Part Number
Engine Oil With Filter - With AdBlue 4.43 Quarts / 4.2 Liters For best performance and maximum protection under all types of operating conditions, the manufacturer recommends SELENIA WR FORWARD engine oils, or equivalent, API Certified SAE 0W-20 that meet the requirements of FCA Material Standard 9.55535-DSX and ACEA C2.
NOTE:

  • If lubricants compliant with the required specifications are not available, products that comply with the minimum required characteristics can be used for topping off; in this case optimal performance of the engine is not guaranteed.
  • The use of products with specifications other than those indicated above could cause damage to the engine not covered by the warranty.

 N/A N/A
Engine Oil With Filter - Without AdBlue 4.43 Quarts / 4.2 Liters For best performance and maximum protection under all types of operating conditions, the manufacturer recommends SELENIA WR FORWARD engine oils, or equivalent, API Certified SAE 0W-30 that meet the requirements of FCA Material Standard 9.55535-DS1 or MS.90047 and ACEA C2.
NOTE:

  • If lubricants compliant with the required specifications are not available, products that comply with the minimum required characteristics can be used for topping off; in this case optimal performance of the engine is not guaranteed.
  • The use of products with specifications other than those indicated above could cause damage to the engine not covered by the warranty.

 N/A 68291576GA
Cooling System (1) 6.8 Quarts / 6.5 Liters We recommend you use MOPAR Antifreeze/Coolant 10 Year/150, 000 Mile Formula OAT (Organic Additive Technology) or equivalent meeting the requirements of Material Standard MS.90032. 68163848AB 68163848GB
Fuel Selection 15.9 Gallons / 60 Liters EN590 - -
AdBlue (UREA) Fluid Tank 3.4 Gallons / 13 Liters AdBlue (Urea-Water Solution) According To DIN 70 070 and ISO 22241-1 - -
(1) Includes heater and coolant reservoir filled to MAX level.
2.4L ENGINE

Description Capacities Type Part Number Global Part Number
Engine Oil With Filter 5.5 Quarts / 5.2 Liters We recommend you use SAE 0W-20 API Certified Engine Oil, meeting the requirements of Material Standard MS-6395 such as MOPAR, Pennzoil, and Shell Helix. Refer to your engine oil filler cap for correct SAE grade. 68218950AB 68218950GA
Cooling System (1) 6.8 Quarts / 6.5 Liters We recommend you use MOPAR Antifreeze/Coolant 10 Year/150, 000 Mile Formula OAT (Organic Additive Technology) or equivalent meeting the requirements of Material Standard MS.90032. 68163848AB 68163848GB
Fuel Selection 15.9 Gallons /60 Liters Minimum 91 Research Octane Number (RON) - -
Spark Plugs GAP We recommend you use MOPAR Spark Plugs. - -
0.047 in / 1.2 mm - -
(1) Includes heater and coolant reservoir filled to MAX level.
A/C REFRIGERANT SYSTEM

Description Charge Amounts Type Part Number Global Part Number
A/C System R-134a Refrigerant
All Engines - 1.25lb / 567 g		 Use only refrigerant R-134a 82300101AC 82300101GB
Compressor Oil
2.0L and 2.4L Gasoline engines 4.56 oz / 135 ml
2.0L Diesel 5.07 oz / 150ml		 Use Only PAG Oil PSD1:
1.4L Gasoline engines - 120ml (4.1 fl oz)
Use Only PAG Oil ND12:
2.4L Gasoline engine - 90 ml (3.0 fl oz)
1.6L Diesel engines - 90 ml (3.0 fl oz)
2.0L Diesel engines - 90 ml (3.0 fl oz)		 - -
A/C System 1234yf Refrigerant
All Engines - 1.063lb / 482 g		 Use only refrigerant 1234yf 68224028AB 68224028GA
Compressor Oil Use Only PAG Oil PSD1:
1.4L Gasoline engines - 120ml (4.1 fl oz)
Use Only PAG Oil ND12:
2.4L Gasoline engine - 90 ml (3.0 fl oz)
1.6L Diesel engines - 90 ml (3.0 fl oz)
2.0L Diesel engines - 90 ml (3.0 fl oz)		 - -
TRANSMISSION

Description Capacities Type Part Number Global Part Number
948TE Automatic Transaxle Service Fill 6.35 Quarts / 6.0 Liters Use only MOPAR ZF 8&9 Speed ATF Automatic Transmission Fluid, or equivalent. Failure to use the correct fluid may affect the function or performance of your transmission. 68218925AA 68218925GA
948TE Overhaul Fill Refer to FLUID AND FILTER, STANDARD PROCEDURE .
AW60T / 6F25 - Transaxle 6.6 Quarts / 6.2 Liters Use only MOPAR®AW-1 Automatic Transmission Fluid or equivalent. Failure to use the correct fluid may affect the function or performance of your transmission. 68092912AB -
C635 Manual Transaxle 2.0 Quarts / 1.88 Liters We recommend you use MOPAR C Series Manual & Dual Dry Clutch Transmission Fluid. 68092630AA 68092630GA
For the C635 fluid level inspection. Refer to FLUID, STANDARD PROCEDURE .
TRANSFER CASE

Description Capacities Type Part Number Global Part Number
Power Transfer Unit (PTU) - If Equipped 0.42 Quarts / 0.4 Liters Mopar Front Axle/PTU Synthetic Axle Lubricant SAE 75W-90 (API GL-5) 68280932AA -
CHASSIS SYSTEMS

Description Capacities Type Part Number Global Part Number
Rear Differential (RDM) - If Equipped 0.63 Quarts / 0.6 Liters Mopar Rear Axle/RDM Synthetic Axle Lubricant SAE 75W-90 (API GL-5) 68280933AA -
Brake Master Cylinder N/A We recommend you use MOPAR DOT 4. If DOT 4 brake fluid is not available, then DOT 3 is acceptable. 04549625AD 04549625GD
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready ToolsCompare Repair QuoteQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.