Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2017 Jeep Grand Cherokee Laredo, AWDFACTORY OEM SERVICE PROCEDURE
Torque Specifications
WARNING: This page is about a different car, the 2016 Dodge Journey and 2015 Dodge Journey. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS
| DESCRIPTION | N.m | Ft. Lbs. | In. Lbs. |
|---|---|---|---|
| Camshaft Position Sensor Bolt - 2.4L, 3.6L | 9 | - | 80 |
| Crankshaft Position Sensor Bolt - 3.6L | 12 | - | 106 |
| Ignition Coil Mounting Bolts - 2.4L | 9 | - | 80 |
| Ignition Coil Mounting Bolts - 3.6L | 8 | - | 71 |
| Spark Plugs - 2.4L | 27 | 20 | - |
| Spark Plugs - 3.6L | 17.5 | 13 | - |
| Ignition Coil Capacitor Bolt - 2.4, 3.6L | 10 | - | 89 |
| Knock Sensor - 2.4L | 20 | 15 | - |
| * Knock Sensor - 3.6L | 22 | 16 | - |
| Variable Valve Timing Solenoids - 3.6L | 4 | - | 35 |
| * Do not apply any sealant, thread-locker or adhesive to bolts. Poor sensor performance may result. |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.