Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2015 Jeep Wrangler Rubicon, Automatic TransFACTORY OEM SERVICE PROCEDURE
Torque Specifications Diesel Engine
DIESEL ENGINE TORQUE SPECIFICATIONS TABLE
| DESCRIPTION | N.m | Ft. Lbs. | In. Lbs. |
|---|---|---|---|
| A/C Condenser-to-Radiator Bolts | 5 | - | 44 |
| Belt Tensioner Bolt | 45 | 33 | - |
| Charge Air Cooler Bolts | 10 | - | 89 |
| Charge Air Cooler Hose Clamps | 5 | - | 44 |
| Coolant Temperature Sensor | 11 | 8 | - |
| EGR Cooler Bolts | 15 | 11 | - |
| EGR Cooler Manifold Bolts | 25 | 18 | - |
| EGR Cooler Support Bracket Bolt | 25 | 18 | - |
| EGR Cooler Support Manifold Bracket Bolt | 45 | 33 | - |
| Fan Shroud Bolts | 9 | - | 80 |
| Fan Blade to Viscous Fan Drive Bolts | 25 | 18 | - |
| Fan Drive Bolt | 45 | 33 | - |
| Front Engine Lift Bracket Bolts | 69 | 51 | - |
| Idler Pulley Bolt | 45 | 33 | - |
| Pressurized Coolant Recovery Bottle Nuts | 10 | - | 89 |
| Radiator Mount Bolts | 12 | 9 | - |
| Thermostat Housing Bolts | 12 | 9 | - |
| Transmission Oil Cooler Bolts | 8 | - | 71 |
| Transmission Oil Cooler Line Bolt | 8 | - | 71 |
| Viscous Fan Drive-to-Fan Drive Pulley | 50 | 37 | - |
| Water Inlet Tube Bolts | 12 | 9 | - |
| Water Pump Bolts | 32 | 24 | - |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.
