Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSJEEP2014GRAND CHEROKEE LAREDO, AWDREPAIR AND DIAGNOSISGENERAL INFORMATIONDTC INDEXMODULE, PASSENGER DOOR (PDM), (DMFR)
2014 Jeep Grand Cherokee Laredo, AWD
Module, Passenger Door (PDM), (DMFR)
2014 Jeep Grand Cherokee Laredo, AWDSECTION Module, Passenger Door (PDM), (DMFR)
DIAGNOSTIC CODE INDEX
| DTC | Description |
|---|---|
| B173D-11 | MIRROR SIGNAL LAMP CONTROL - CIRCUIT SHORT TO GROUND |
| B173D-12 | MIRROR SIGNAL LAMP CONTROL - CIRCUIT SHORT TO BATTERY |
| B173D-13 | MIRROR SIGNAL LAMP CONTROL - CIRCUIT OPEN |
| B1755-11 | PUDDLE LAMP CONTROL CIRCUIT SHORT TO GROUND |
| B1755-15 | PUDDLE LAMP CONTROL CIRCUIT SHORT TO BATTERY OR OPEN |
| B18BA-11 | WINDOW CONTROL - CIRCUIT SHORT TO GROUND |
| B18BA-12 | WINDOW CONTROL - CIRCUIT SHORT TO BATTERY |
| B18BA-13 | WINDOW CONTROL - CIRCUIT OPEN |
| B18E6-2A | WINDOW SWITCH - STUCK |
| B1DD0-11 | MIRROR HEATER CONTROL - CIRCUIT SHORT TO GROUND |
| B1DD0-15 | MIRROR HEATER CONTROL - CIRCUIT SHORT TO BATTERY OR OPEN |
| B1F02-11 | MIRROR VERTICAL MOTOR CONTROL - CIRCUIT SHORT TO GROUND |
| B1F02-12 | MIRROR VERTICAL MOTOR CONTROL - CIRCUIT SHORT TO BATTERY |
| B1F02-13 | MIRROR VERTICAL MOTOR CONTROL - CIRCUIT OPEN |
| B1F03-11 | MIRROR HORIZONTAL MOTOR CONTROL - CIRCUIT SHORT TO GROUND |
| B1F03-12 | MIRROR HORIZONTAL MOTOR CONTROL - CIRCUIT SHORT TO BATTERY |
| B1F03-13 | MIRROR HORIZONTAL MOTOR CONTROL - CIRCUIT OPEN |
| B1F04-11 | MIRROR FOLD CONTROL - CIRCUIT SHORT TO GROUND |
| B1F04-15 | MIRROR FOLD CONTROL - CIRCUIT SHORT TO BATTERY OR OPEN |
| B1F05-11 | ELECTROCHROMATIC MIRROR CONTROL CIRCUIT-CIRCUIT SHORT TO GROUND |
| B1F05-12 | ELECTROCHROMATIC MIRROR CONTROL CIRCUIT-CIRCUIT SHORT TO BATTERY |
| B1F05-13 | ELECTROCHROMATIC MIRROR CONTROL CIRCUIT-CIRCUIT OPEN |
| B1F06-12 | MIRROR CONTROL SENSOR POSITION CIRCUIT - CIRCUIT SHORT TO BATTERY |
| B1F06-14 | MIRROR CONTROL SENSOR POSITION CIRCUIT - CIRCUIT SHORT TO GROUND OR OPEN |
| B210C-16 | BATTERY VOLTAGE INPUT - CIRCUIT VOLTAGE BELOW THRESHOLD |
| B210C-17 | BATTERY VOLTAGE INPUT - CIRCUIT VOLTAGE ABOVE THRESHOLD |
| B21A1-00 | ECU RESET/RECOVERY OCCURRED |
| B21DD-84 | SYSTEM VOLTAGE - SIGNAL BELOW ALLOWABLE RANGE |
| B21DD-85 | SYSTEM VOLTAGE - SIGNAL ABOVE ALLOWABLE RANGE |
| B224F-54 | DOOR MODULE INTERNAL - MISSING CALIBRATION |
| B224F-96 | DOOR MODULE INTERNAL - COMPONENT INTERNAL FAILURE |
| B25AF-2A | DOOR LOCK/UNLOCK SWITCH - STUCK |
| B25B0-31 | WINDOW POSITION SENSOR - NO SIGNAL |
| B25B1-11 | WINDOW POSITION SENSOR POWER SUPPLY - CIRCUIT SHORT TO GROUND |
| B285E-11 | WINDOW SWITCH BACKLIGHTING-CIRCUIT SHORT TO GROUND |
| B285F-11 | BLIND SPOT WARNING LIGHT CONTROL - CIRCUIT SHORT TO GROUND-PASS |
| B285F-15 | BLIND SPOT WARNING LIGHT CONTROL - CIRCUIT SHORT TO BATTERY OR OPEN |
| B2860-11 | DOOR AMBIENT LIGHT CONTROL - CIRCUIT SHORT TO GROUND |
| B2860-15 | DOOR AMBIENT LIGHT CONTROL-CIRCUIT SHORT TO BATTERY OR OPEN |
| B2861-11 | MIRROR APPROACH LIGHT CONTROL - CIRCUIT SHORT TO GROUND |
| B2861-15 | MIRROR APPROACH LIGHT CONTROL - CIRCUIT SHORT TO BATTERY OR OPEN |
| U0010-00 | CAN INTERIOR BUS |
| U0018-00 | CAN INTERIOR BUS (-) SHORTED TO BUS (+) |
| U0140-00 | LOST COMMUNICATION WITH BODY CONTROL MODULE |
| U0164-00 | LOST COMMUNICATION WITH HVAC CONTROL MODULE |
| U0199-00 | LOST COMMUNICATION WITH DRIVER DOOR MODULE |
| U0232-00 | LOST COMMUNICATION WITH BLIND SPOT DETECTION MODULE |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.