Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSJEEP2014GRAND CHEROKEE LAREDO, AWDREPAIR AND DIAGNOSIS (SINGLE PAGE)QUICK LOOKUPSDTC INDEXMODULE, EXTERNAL DISC
2014 Jeep Grand Cherokee Laredo, AWD
Module, External Disc
2014 Jeep Grand Cherokee Laredo, AWDSECTION Module, External Disc
DIAGNOSTIC CODE INDEX
| DTC | Description |
|---|---|
| B1423-00 | VES DVD READ ERROR/INOPERABLE DISC- |
| B1424-00 | IMPROPER DVD - WRONG REGION |
| B1441-00 | VES EJECT INPUT BUTTON STUCK |
| B142B-00 | VES UNIT HIGH TEMPERATURE |
| B14DF-00 | DVD PLAYER REGION CONFIGURATION MISMATCH- |
| B210A-00 | SYSTEM VOLTAGE LOW- |
| B210B-00 | SYSTEM VOLTAGE HIGH- |
| B210D-00 | BATTERY VOLTAGE LOW |
| B210E-00 | BATTERY VOLTAGE HIGH- |
| B21A1-00 | ECU RESET/RECOVERY OCCURRED |
| B2199-16 | BATTERY VOLTAGE - CIRCUIT VOLTAGE BELOW THRESHOLD |
| B2199-17 | BATTERY VOLTAGE-CIRCUIT VOLTAGE ABOVE THRESHOLD |
| B21DD-84 | SYSTEM VOLTAGE-SIGNAL BELOW ALLOWABLE RANGE |
| B21DD-85 | SYSTEM VOLTAGE-SIGNAL ABOVE ALLOWABLE RANGE |
| B222C-00 | VEHICLE CONFIGURATION NOT PROGRAMMED |
| B222B-00 | VEHICLE ENTERTAINMENT SYSTEM INTERNAL |
| U0010-00 | CAN INTERIOR BUS |
| U0011-00 | CAN INTERIOR BUS OFF PERFORMANCE |
| U0013-00 | CAN INTERIOR BUS (+) CIRCUIT LOW |
| U0014-00 | CAN INTERIOR BUS (+) CIRCUIT HIGH |
| U0016-00 | CAN INTERIOR BUS (-) CIRCUIT LOW |
| U0017-00 | CAN INTERIOR BUS (-) CIRCUIT HIGH |
| U0140-00 | LOST COMMUNICATION WITH BODY CONTROL MODULE |
| U0155-00 | LOST COMMUNICATION WITH CLUSTER/CCN |
| U0184-00 | LOST COMMUNICATION WITH RADIO |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.