Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2014 Jeep Compass Limited, FWDFACTORY OEM SERVICE PROCEDURE
Engine Cooling System: Specifications: Torque
| DESCRIPTION | N.m | Ft. Lbs. | In. Lbs. |
|---|---|---|---|
| Bolts, A/C Condenser to Radiator | 5 | - | 44 |
| Bolt, Automatic Belt Tensioner Pulley - Gas Engine | 24 | 18 | - |
| Bolt Automatic Belt Tension Assembly | 54 | 40 | - |
| Bolts, Charge Air Cooler to Radiator (Turbo Equipped) | 5 | - | 44 |
| Bolt, Coolant Recovery Bottle | 4 | - | 35 |
| Bolts, Coolant Adapter | 18 | 13 | - |
| Bolts, Inlet Housing to Coolant Adapter | 11 | 8 | 97 |
| Screw, Bypass Valve to Radiator | 5 | - | 44 |
| Screw, Bypass Tube to EGR Cooler | 10 | 7 | 89 |
| Screw, Transmission Cooler to Radiator | 5 | - | 44 |
| Engine Coolant Temperature Sensor | 17 | 13 | - |
| Pivot Bolt, Generator Mounting | 54 | 40 | - |
| Locking Nut, Generator Mounting | 54 | 40 | - |
| Screws, Transmission Cooler to Radiator | 8 | - | 71 |
| Bolts, Water Pump to Engine Block | 24 | 18 | - |
| EGR Cooler to Exhaust Manifold Tube Nuts | 20 | 15 | - |
| EGR Cooler to Exhaust Manifold Tube Bolts | 20 | 15 | - |
| EGR to EGR Valve Tube Bolts | 20 | 15 | - |
| Bolts, Water Pump Inlet Tube to Water Pump Housing - Gas Engine | 24 | 18 | - |
| Bolts, Water Pump to Water Pump Adapter - Gas Engine | 22 | 16 | - |
| Bolts, Water Pump Pulley to Water Pump - Gas Engine | 9 | - | 80 |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.