Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2014 Jeep Compass Limited, AWD, Automatic TransFACTORY OEM SERVICE PROCEDURE
Torque Specifications
TORQUE SPECIFICATIONS TABLE
| Description | N.m | Ft. Lbs | In. Lbs |
|---|---|---|---|
| EGR Air Flow Control Valve Bolt | 9 | - | 80 |
| EGR Back Pressure Transducer | 25 | 18 | - |
| EGR Bypass Valve | 9 | - | 80 |
| EGR Bypass Vacuum Diaphragm Bolt | 12 | - | 106 |
| EGR Cooler Support Bolt | 9 | - | 80 |
| EGR Manifold Bolts | 9 | - | 80 |
| EGR Support Bracket Bolts | 9 | - | 80 |
| EGR Tube Bolt | 9 | - | 80 |
| EGR Vacuum Solenoid Bolts | 9 | - | 80 |
| EGR Valve Bolts | 9 | - | 80 |
| Vacuum Tube Bolt | 9 | - | 80 |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.