Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2014 Jeep Cherokee Sport, FWDFACTORY OEM SERVICE PROCEDURE
Torque Specifications
TORQUE SPECIFICATIONS
| TORQUE SPECIFICATIONS | |||
|---|---|---|---|
| DESCRIPTION | N.m | Ft. Lbs. | In. Lbs. |
| Seat Belt Turning Loop Height Adjuster Screws | 45 | 33 | - |
| Seat Belt Turning Loop To Height Adjuster Nuts | 45 | 33 | - |
| Inflatable Knee Blocker To Instrument Panel Nuts | 9 | - | 80 |
| Passenger Airbag To Instrument Panel Structural Support Screws | 9 | - | 80 |
| Front Seat Airbag To Seat Back Frame Nuts | 10 | - | 88 |
| Rear Seat Airbag To Rear Seat Cushion Frame Nuts | 7 | - | 62 |
| Rear Seat Airbag Initiator Cover Screw | 3 | - | 27 |
| Rear Seat Airbag Tether Anchor Clip Screw | 5 | - | 44 |
| Side Curtain Airbag To Inner Roof Rail Screws | 7 | - | 62 |
| Side Curtain Airbag Front Tether Clip Screw | 7 | - | 62 |
| Side Curtain Airbag Rear Tether Clip Screw | 7 | - | 62 |
| Front Seat Belt Anchor Tensioner To Inner Sill Screws | 45 | 33 | - |
| Front Seat Belt Buckle Lower Anchor To Seat Screws | 45 | 33 | - |
| Rear Seat Belt Buckle Lower Anchor To Floor Panel Nuts | 40 | 30 | - |
| Occupant Restraint Controller To Floor Panel Nuts | 8 | - | 71 |
| Front Seat Belt Retractor To Inner B-Pillar Screws | 58 | 43 | - |
| Front Seat Belt Turning Loop To Height Adjuster Nut | 45 | 33 | - |
| Rear Seat Belt Retractor To Shelf Panel Nut | 45 | 33 | - |
| Rear Seat Belt Lower Anchor To Floor Panel Nut | 45 | 33 | - |
| Front Impact Sensor To Front End Module Screws | 11 | - | 97 |
| Side Impact Sensor To Inner B-Pillar Nuts | 11 | - | 97 |
| Side Impact Sensor To Inner C-Pillar Nuts | 11 | - | 97 |
| Side Impact Sensor To Front Door Hardware Module Carrier Screws | 2.4 | - | 21 |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.