Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2014 Jeep Cherokee Sport, FWDFACTORY OEM SERVICE PROCEDURE
Quick Lookups: Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Refrigerant | w/R-1234yf | 1.13 LBS. | 0.51 KG | R-1234yf | S | ||
| Air Cond Refrigerant | w/R-134a | 1.19 LBS. | 0.53 KG | R-134a | S | ||
| Automatic Transmission Fluid | 6.35 QTS. | 6 L | MOPAR ZF 8&9 Speed Automatic Transmission Fluid, or equivalent | Dry fill capacity, depending on the type and size of the internal cooler, length and inside diameter of cooler lines, or use of an auxiliary cooler may vary. Failure to use the correct fluid may affect the function or performance of the transmission. | S | ||
| Brake Fluid | N/A | N/A | MORAR Brake Fluid DOT 3, SAE J1703 | If MOPAR Brake Fluid DOT 3 is not available, then MOPAR Brake and Clutch Fluid DOT 4 is acceptable. | S | ||
| Engine Coolant | 2.4L Eng | 7.20 QTS. | 6.81 L | MOPAR Antifreeze/Coolant 10 Year/150,000 Mile Formula OAT (Organic Additive Technology) or equivalent meeting the requirements of Chrysler Material Standard MS-12106 | Includes: heater and coolant recovery tank filled to "max" level. | S | |
| Engine Oil | 2.4L Eng | w/Filter | 5.50 QTS. | 5.2 L | API - Certified Engine Oil, SAE 0W-20 | SAE 5W-20 engine oil approved to MS-6395 or Fiat 9.55535-CR1 may be used when SAE 0W-20 engine oil is not available. Ensure that you switch back to 0W-20 for the next oil change, as indicated by your vehicles automatic oil change indicator. | S |
| Fuel Tank | 15.80 GALS. | 59.8 L | S | ||||
| Power Steering Fluid | N/A | N/A | S | ||||
| Windshield Washer Fluid | N/A | N/A | Windshield Washer Solvent only | Follow the Manufacturer's Instructions for the mixture ratio. | S | ||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.