2012 Jeep Grand Cherokee Laredo, AWDFACTORY OEM SERVICE PROCEDURE

Exhaust Gas RECIRCULATION, Diesel: Specifications: Torque

DESCRIPTION N.m Ft. Lbs. In. Lbs.
EGR Airflow Control Valve 9 - 80
EGR Bypass Vacuum Solenoid Bolts 9 - 80
EGR Cooler Bolts 25 18 -
EGR Cooler Bypass Valve Support Bracket Bolts 25 18 -
EGR Cooler Coolant Tube Bolts 18 - 159
EGR Tube Clamp Bolts 4 - 35
EGR Valve Bolts 8 - 71
High Pressure Fuel Tube Support Bracket Bolt 11 - 97
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.