Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSJEEP2011LIBERTY RENEGADE, PART TIMEREPAIR AND DIAGNOSIS (SINGLE PAGE)QUICK LOOKUPSDTC INDEXMODULE, TRANSMISSION CONTROL (TCM)
2011 Jeep Liberty Renegade, Part Time
MODULE, Transmission Control (TCM)
2011 Jeep Liberty Renegade, Part TimeSECTION MODULE, Transmission Control (TCM)
DIAGNOSTIC CODE INDEX
| DTC | Description |
|---|---|
| P0219 | ENGINE OVERSPEED |
| P0501 | VEHICLE SPEED SENSOR 1 PERFORMANCE |
| P0601 | INTERNAL MEMORY CHECKSUM INVALID |
| P0614 | ECM/TCM INCOMPATIBLE |
| P0730 | INCORRECT GEAR RATIO |
| P0731 | GEAR RATIO ERROR IN 1ST |
| P0732 | GEAR RATIO ERROR IN 2ND |
| P0733 | GEAR RATIO ERROR IN 3RD |
| P0734 | GEAR RATIO ERROR IN 4TH |
| P0735 | GEAR RATIO ERROR IN 5TH |
| P0562 | BATTERY VOLTAGE LOW |
| P0563 | BATTERY VOLTAGE HIGH |
| P0602 | CONTROL MODULE PROGRAMMING ERROR/NOT PROGRAMMED |
| P0604 | INTERNAL CONTROL MODULE RAM |
| P0605 | INTERNAL CONTROL MODULE ROM |
| P0613 | INTERNAL TRANSMISSION PROCESSOR |
| P0642 | SENSOR REFERENCE VOLTAGE 1 CIRCUIT LOW |
| P0643 | SENSOR REFERENCE VOLTAGE 1 CIRCUIT HIGH |
| P0657 | SOLENOID SUPPLY VOLTAGE CIRCUIT |
| P0710 | TRANSMISSION TEMPERATURE SENSOR CIRCUIT |
| P0712 | TRANSMISSION TEMPERATURE SENSOR LOW |
| P0714 | TRANSMISSION TEMPERATURE SENSOR INTERMITTENT |
| P0717 | INPUT SPEED SENSOR 1 CIRCUIT NO SIGNAL |
| P0741 | TORQUE CONVERTER CLUTCH CIRCUIT PERFORMANCE |
| P0742 | TORQUE CONVERTER CLUTCH STUCK ON |
| P0743 | TCC SOLENOID CIRCUIT |
| P0748 | MODULATOR PRESSURE SOLENOID CIRCUIT |
| P0752 | 1-2/4-5 SOLENOID |
| P0753 | 1-2/4-5 SOLENOID CIRCUIT |
| P0757 | 2-3 SOLENOID |
| P0758 | 2-3 SOLENOID CIRCUIT |
| P0762 | 3-4 SOLENOID |
| P0763 | 3-4 SOLENOID CIRCUIT |
| P0778 | SHIFT PRESSURE SOLENOID CIRCUIT |
| P0817 | STARTER DISABLE (P/N) CIRCUIT/OPEN |
| P1629 | TCM INTERNAL - SOLENOID SUPPLY/ WATCHDOG |
| P1631 | TCM INTERNAL- PROCESSOR CLOCK PERFORMANCE |
| P1632 | TCM INTERNAL - TEST INTERNAL WATCHDOG PERFORMANCE |
| P1633 | TCM INTERNAL - TEST EXTERNAL WATCHDOG PERFORMANCE |
| P1634 | TCM INTERNAL- INTERNAL WATCHDOG PERFORMANCE |
| P1636 | TCM INTERNAL- EXTERNAL WATCHDOG PERFORMANCE |
| P1637 | TCM INTERNAL-EEPROM PERFORMANCE |
| P1638 | TCM INTERNAL-CAN 1 RAM PERFORMANCE |
| P1639 | TCM INTERNAL-CAN 2 RAM PERFORMANCE |
| P1644 | INCORRECT VARIANT/CONFIGURATION |
| P1704 | INPUT SPEED SENSOR 1 OVERSPEED |
| P1705 | INPUT SPEED SENSOR 2 OVERSPEED |
| P1731 | INCORRECT GEAR ENGAGED |
| P2638 | TORQUE MANAGEMENT FEEDBACK SIGNAL PERFORMANCE |
| P2767 | INPUT SPEED SENSOR 2 CIRCUIT NO SIGNAL |
| P2784 | INPUT SPEED SENSOR 1/2 CORRELATION |
| P2783 | TORQUE CONVERTER TEMPERATURE TOO HIGH |
| U0002 | CAN C BUS OFF PERFORMANCE |
| U0100 | LOST COMMUNICATION WITH ECM/PCM |
| U0103 | LOST COMMUNICATION WITH ELECTRIC GEAR SHIFT MODULE |
| U0121 | LOST COMMUNICATION WITH ANTI-LOCK BRAKE MODULE |
| U0141 | LOST COMMUNICATION WITH FRONT CONTROL MODULE (TIPM) |
| U0155 | LOST COMMUNICATION WITH CLUSTER/CCN |
| U0164 | LOST COMMUNICATION WITH HVAC CONTROL MODULE |
| U0401 | IMPLAUSIBLE DATA RECEIVED FROM ECM/PCM |
| U0404 | IMPLAUSIBLE DATA RECEIVED FROM ESM |
| U0414 | IMPLAUSIBLE DATA RECEIVED FROM FDCM |
| U0415 | IMPLAUSIBLE DATA RECEIVED FROM ABS |
| U0423 | IMPLAUSIBLE DATA RECEIVED FROM CLUSTER/CCN |
| U0424 | IMPLAUSIBLE DATA RECEIVED FROM HVAC CONTROL MODULE |
| U0431 | IMPLAUSIBLE DATA FROM FCM (TIPM) |
| U110B | LOST ENGINE COOLANT MESSAGE |
| U1118 | LOST ENGINE MESSAGE |
| U1119 | LOST FCM MESSAGE |
| U1400 | IMPLAUSIBLE TPS SIGNAL RECEIVED |
| U1401 | IMPLAUSIBLE ENGINE SPEED SIGNAL RECEIVED |
| U1402 | IMPLAUSIBLE ENGINE TEMPERATURE SIGNAL RECEIVED |
| U1404 | IMPLAUSIBLE STATIC ENGINE TORQUE SIGNAL RECEIVED |
| U1405 | IMPLAUSIBLE MINIMUM ENGINE TORQUE SIGNAL RECEIVED |
| U1406 | IMPLAUSIBLE MAXIMUM ENGINE TORQUE SIGNAL RECEIVED |
| U1407 | IMPLAUSIBLE ENGINE TORQUE REQUEST SIGNAL RECEIVED |
| U1408 | IMPLAUSIBLE BRAKE SIGNAL RECEIVED |
| U1409 | IMPLAUSIBLE LEFT FRONT WHEEL SPEED SIGNAL RECEIVED |
| U140A | IMPLAUSIBLE RIGHT FRONT WHEEL SPEED SIGNAL RECEIVED |
| U140B | IMPLAUSIBLE LEFT REAR WHEEL SPEED SIGNAL RECEIVED |
| U140C | IMPLAUSIBLE RIGHT REAR WHEEL SPEED SIGNAL RECEIVED |
| U140D | IMPLAUSIBLE WHEEL SPEED SIGNALS RECEIVED |
| U140F | IMPLAUSIBLE ENGINE VARIANT DATA |
| U1410 | IMPLAUSIBLE/MISSING FCM/TIPM VARIANT DATA |
| U1505 | IMPLAUSIBLE MESSAGE DATA LENGTH RECEIVED FROM FDCM |
| U1507 | IMPLAUSIBLE ENGINE TEMPERATURE MESSAGE DATA LENGTH RECEIVED |
| U1508 | IMPLAUSIBLE MESSAGE DATA LENGTH RECEIVED FROM ESM |
| U1509 | IMPLAUSIBLE ENGINE VARIANT MESSAGE DATA LENGTH RECEIVED |
| U150A | IMPLAUSIBLE FCM VARIANT MESSAGE DATA LENGTH RECEIVED |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.