SYS.OK|MANUAL.DBâ—Ź LIVE
HOMESERVICE MANUALSJEEP2011LIBERTY LIMITED, 4WD, AUTOMATICREPAIR AND DIAGNOSISMAINTENANCEPROCEDURESVEHICLE QUICK REFERENCECAPACITIES AND RECOMMENDED FLUIDSSPECIFICATIONSSPECIFICATIONS
2011 Jeep Liberty Limited, 4WD, Automatic

Capacities and Recommended Fluids: Specifications: Specifications

2011 Jeep Liberty Limited, 4WD, AutomaticSECTION Specifications
ENGINE

Description  Type  Part Number  Capacities 
U.S.  Metric 
Cooling System 
Engine Coolant (3.7L Engine) (1) MOPAR® Antifreeze/Coolant 5 Year/100, 000 Mile Formula HOAT (Hybrid Organic Additive Technology) 1 Gallon - 05066386AA 14 Quarts 13.2 Liters
Engine Coolant (2.8L Diesel Engine) (1) MOPAR® Antifreeze/Coolant 5 Year/100, 000 Mile Formula HOAT (Hybrid Organic Additive Technology) 1 Gallon - 05066386AA 13 Quarts 12 Liters
Engine Oil with Filter 
Engine Oil (3.7L Engine) Domestic and Export Non ACEA (2) & (3) MOPAR® API Certified SAE 5W-20 engine oil, meeting the requirements of Chrysler Material Standard MS-6395. 1 Quart - 04761872AC 5 Quarts 4.7 Liters
5 Quarts - 04761851AD
Engine Oil (2.8L Diesel Engine) (4) SAE 0W-40 Diesel Engine Oils confirming to API (American Petroleum Institute) Quality CI-4 or CJ-4. For countries that use the ACEA European Oil Categories for Service Fill Oils, use engine oils meeting the requirements of ACEA C3 and approved to MB 229.31 or MB 229.51. 1 Quart - 05127394AA 7 Quarts 6.6 Liters
Engine Oil Filter (3.7L Engine) MOPAR® Engine Oil Filter 05184231AA N/A N/A
Engine Oil Filter (2.8L Diesel engine) MOPAR® Engine Oil Filter 5003558AA N/A N/A
Fuel (approximate) 
Fuel Selection (3.7L Engine) Domestic 87 Octane, (R + M)/2 method N/A 19.5 Gallons 73.8 Liters
Fuel Selection (3.7L Engine) Export 91 Octane N/A 19.5 Gallons 73.8 Liters
Fuel Selection (2.8L Diesel Engines) Use only the best quality fuel with a calculated Cetane Index of 50 or higher. In addition, the manufacturer recommends using diesel fuel with a sulfur content of less than or equal to 15 ppm.  N/A 18.5 Gallons 70 Liters
A/C Refrigerant System 
A/C Refrigerant (Single) R-134a 82300101AB 1.12 Pounds 0.510 Kilograms
(1) System fill capacity includes heater and coolant recovery bottle filled to MAX level
.
(2) SAE 5W-30 engine oil approved to MB 229.31 or MB 229.51 may be used when SAE 5W-20 engine oil is not available.
(3) For countries that use the ACEA European Oil Categories for Service Fill Oils, use the recommended engine oil that meets the requirements of ACEA C3, and approved to MB 229.31 or MB 229.51 only. Refer to your engine oil filler cap for correct SAE grade.
(4) If equipped with a particulate filter, use SAE 5W-30 Diesel Engine Oils confirming to API (American Petroleum Institute) Quality CI-4 or CJ-4. For countries that use the ACEA European Oil Categories for Service Fill Oils, use engine oils meeting the requirements of ACEA C3 (LOW ASH) and approved to MB 229.31 or MB 229.51.
CAUTION:

Nominal refill capacities are shown. A variation may be observed from vehicle to vehicle due to manufacturing tolerance and refill procedure.
SPARK PLUGS

Description  Type  Part Number  Gap 
U.S.  Metric 
Spark Plugs (3.7L Engine) NGK® Nickel Spark Plug 56028356AA (ZFR6F-11G) 0.044 in 1.10 mm
AUTOMATIC TRANSMISSION

Description  Type  Part Number  Capacities 
U.S.  Metric 
Automatic 
42RLE - Service Fill MOPAR® ATF+4 Automatic Transmission Fluid 1 Quart - 05013457AA 4.0 Quarts 3.8 Liters
1 Gallon - 05013458AA
42RLE- Overhaul Fill (1) MOPAR® ATF+4 Automatic Transmission Fluid 1 Quart - 05013457AA 8.8 Quarts 8.3 Liters
1 Gallon - 05013458AA
NAG 1 - Service Fill MOPAR® ATF+4 Automatic Transmission Fluid 1 Quart - 05013457AA 5.3 Quarts 5.0 Liters
1 Gallon - 05013458AA
NAG 1 - Overhaul Fill (1) MOPAR® ATF+4 Automatic Transmission Fluid 1 Quart - 05013457AA 8.1 Quarts 7.7 Liters
1 Gallon - 05013458AA
Manual 
NSG370 (2) MOPAR® Manual Transmission Lubricant 1 Quart - 04874464 1.6 Quarts 1.5 Liters
(1) Dry fill capacity. Depending on type and size of internal cooler, length and inside diameter of cooler lines, or use of an auxiliary cooler, these figures may vary. Refer to the appropriate service information for the correct procedures.
(2) Approximate dry fill or fill to bottom edge of fill plug hole.
CAUTION:

Nominal refill capacities are shown. A variation may be observed from vehicle to vehicle due to manufacturing tolerance and refill procedure.
TRANSFER CASE

Description  Type  Part Number  Capacities 
U.S.  Metric 
MP1522 (1) MOPAR® ATF+4 Automatic Transmission Fluid 1 Quart - 05013457AA 1.9 Quarts 1.8 Liters
1 Gallon - 05013458AA
MP3022 (1) MOPAR® ATF+4 Automatic Transmission Fluid 1 Quart - 05013457AA 2.0 Quarts 1.9 Liters
1 Gallon - 05013458AA
(1) Approximate dry fill or fill to bottom edge of fill plug hole.
CAUTION:

Nominal refill capacities are shown. A variation may be observed from vehicle to vehicle due to manufacturing tolerance and refill procedure.
CHASSIS

Description  Type  Part Number  Capacities 
U.S.  Metric 
Axles (Front) 
186 FIA - Front Axle MOPAR® Gear & axle Lubricant SAE 80W-90 1 Quart - 04874468 2.6 Pints 1.24 Liters
Axles (Rear) 
8.25 Rear Axle MOPAR® Synthetic Gear Lubricant, SAE 75W-140 1 Quart - 04874469AA 4.4 Pints 2.08 Liters
Chassis Systems 
Brake Master Cylinder (2) MOPAR® Brake Fluid DOT 3, SAE J1703. 12 oz. Bottle - 04318080AB N/A N/A
32 oz. Bottle - 04318081AB
Clutch Master Cylinder (2) MOPAR® Brake Fluid DOT 3, SAE J1703. 12 oz. Bottle - 04318080AB N/A N/A
32 oz. Bottle - 04318081AB
Power Steering Reservoir (3) MOPAR® Power Steering Fluid +4 16 oz. Bottle - 05166226AA N/A N/A
() Limited-Slip Rear Axles require the addition of 118 ml (4 oz.) MOPAR® Limited Slip Additive.
(2) If MOPAR® Brake Fluid DOT 3 is not available, then MOPAR® Brake and Clutch Fluid DOT 4 (04549625AC), is acceptable.
(3) If MOPAR® Power Steering Fluid +4 is not available, then MOPAR® ATF +4 Automatic Transmission Fluid (05013457AA), is acceptable.
CAUTION:

Nominal refill capacities are shown. A variation may be observed from vehicle to vehicle due to manufacturing tolerance and refill procedure.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.