SYS.OK|MANUAL.DB● LIVE
2011 Jeep Liberty 2WD V6-3.7L

Maintenance: Labor Times

2011 Jeep Liberty 2WD V6-3.7LSECTION Labor Times
Standard HoursManufacturer Warranty HoursSkill LevelNotes
Service or Charge
Normal Service
8,000 Miles0.70.0C
16,000 Miles0.90.0C
24,000 Miles0.80.0C
32,000 Miles0.80.0C
Note:
To Change Engine Air Cleaner Filter, Add0.30.0C
To Adjust Parking Brake, Add0.70.0C
To Change Spark Plugs, Add0.50.0C
40,000 Miles0.70.0C
48,000 Miles0.90.0C
56,000 Miles0.70.0C
64,000 Miles0.80.0C
Note:
To Change Engine Air Cleaner Filter, Add0.30.0C
To Change Ignition Cables, Add0.30.0C
To Adjust Parking Brake, Add0.70.0C
To Change Spark Plugs, Add0.50.0C
72,000 Miles0.80.0C
80,000 Miles0.80.0C
Note
To Change Engine Coolant, Add0.70.0CFlush and replace the engine coolant at 60 months if not done at 104,000 miles (169,000 km).
88,000 Miles0.70.0C
96,000 Miles1.00.0C
Note:
To Change Engine Air Cleaner Filter, Add0.30.0C
To Adjust Parking Brake, Add0.70.0C
To Change Spark Plugs, Add0.50.0C
To Change PVC Valve, Add0.00.0CLabor time not available.
104,000 Miles0.70.0C
Note
To Change Engine Coolant, Add0.70.0CFlush and replace the engine coolant at 60 months if not done at 104,000 miles (169,000 km).
112,000 Miles0.90.0C
120,000 Miles0.80.0C
Note
To Change Automatic Transmission Fluid, Add0.70.0C
To Change Accessory Drive Belt, Add0.30.0C
128,000 Miles0.80.0C
Note:
To Change Engine Air Cleaner Filter, Add0.30.0C
To Change Ignition Cables, Add0.30.0C
To Adjust Parking Brake, Add0.70.0C
To Change Spark Plugs, Add0.50.0C
136,000 Miles0.70.0C
144,000 Miles0.80.0C
Severe Service
8,000 Miles0.70.0C
16,000 Miles0.90.0C
Note:
To Change Engine Air Cleaner Filter, Add0.30.0C
24,000 Miles0.80.0C
Note:
To Change Front and Rear Axle Fluid, Add0.50.0B2WD
32,000 Miles0.80.0C
Note:
To Change Engine Air Cleaner Filter, Add0.30.0C
To Adjust Parking Brake, Add0.70.0C
To Change Spark Plugs, Add0.50.0C
40,000 Miles0.70.0C
48,000 Miles0.90.0C
Note:
To Change Front and Rear Axle Fluid, Add0.50.0B2WD
To Change Engine Air Cleaner Filter, Add0.30.0C
56,000 Miles0.70.0C
64,000 Miles0.80.0C
Note:
To Change Engine Air Cleaner Filter, Add0.30.0C
To Change Ignition Cables, Add0.30.0C
To Adjust Parking Brake, Add0.70.0C
To Change Automatic Transmission Fluid, Add0.70.0C
To Change Spark Plugs, Add0.50.0C
72,000 Miles0.80.0C
To Change Front and Rear Axle Fluid, Add0.50.0B2WD
80,000 Miles0.80.0C
Note
To Change Engine Air Cleaner Filter, Add0.30.0C
To Change Engine Coolant, Add0.70.0CFlush and replace the engine coolant at 60 months if not done at 104,000 miles (169,000 km).
88,000 Miles0.70.0C
96,000 Miles1.00.0C
Note:
To Change Engine Air Cleaner Filter, Add0.30.0C
To Adjust Parking Brake, Add0.70.0C
To Change Spark Plugs, Add0.50.0C
To Change Front and Rear Axle Fluid, Add0.50.0B2WD
To Change PVC Valve, Add0.00.0CLabor time not available.
104,000 Miles0.70.0C
Note
To Change Engine Coolant, Add0.70.0CFlush and replace the engine coolant at 60 months if not done at 104,000 miles (169,000 km).
112,000 Miles0.90.0C
Note:
To Change Engine Air Cleaner Filter, Add0.30.0C
120,000 Miles0.80.0C
Note
To Change Front and Rear Axle Fluid, Add0.50.0B2WD
To Change Automatic Transmission Fluid, Add0.70.0C
To Change Accessory Drive Belt, Add0.30.0C
128,000 Miles0.80.0C
Note:
To Change Engine Air Cleaner Filter, Add0.30.0C
To Adjust Parking Brake, Add0.70.0C
To Change Spark Plugs, Add0.50.0C
136,000 Miles0.70.0C
144,000 Miles0.80.0C
Note:
To Change Front and Rear Axle Fluid, Add0.50.0B2WD
To Change Engine Air Cleaner Filter, Add0.30.0C
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.