Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSJEEP2011GRAND CHEROKEE 4WD V6-3.6LREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSENGINECONNECTING ROD, ENGINE
2011 Jeep Grand Cherokee 4WD V6-3.6L
Connecting Rod, Engine
2011 Jeep Grand Cherokee 4WD V6-3.6LSECTION Connecting Rod, Engine
CONNECTING ROD, ENGINE
Tighten the the NEW connecting rod cap bolts 20 Nm (15 ft. lbs.) plus 90°
Side Clearance 0.070 - 0.370 mm (0.0028 - 0.0146 in.)
Side Clearance (Max.) 0.370 mm (0.0146 in.)
Bearing Bore Out of Round (Max.) 0.008 mm (0.0003 in.)
Piston Pin Bore Diameter 22.016 ± 0.005 mm (0.8668 ± 0.0002 in.)
CONNECTING ROD JOURNALS
Diameter 59.0 ± 0.009 mm (2.3228 ± 0.0035 in.)
Out of Round (Max.) 0.005 mm (0.0002 in.)
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.