Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSJEEP2011COMPASS LIMITED, AWD, STANDARDREPAIR AND DIAGNOSISTRANSMISSIONAUTOMATIC TRANSENGINE COOLING SYSTEMENGINEBOTTLE, COOLANT RECOVERYREMOVALDIESEL ENGINE
2011 Jeep Compass Limited, AWD, Standard
Diesel Engine
2011 Jeep Compass Limited, AWD, StandardSECTION Diesel Engine
| 1 - RETURN FITTING |
| 2 - PRESSURE CONTAINER |
| 3 - COOLANT HOSE |
- Partially drain the cooling system using the draincock only. Refer to Standard Procedure . Drain the system below the level of the coolant recovery pressure container (2).
- Disconnect the return hose at the coolant recovery pressure container (2).
- Remove the coolant recovery pressure container bolts.
- Lift container up and disconnect the coolant hose (3) from the bottom of the pressure container (2).
- Remove the pressure container (2) from engine compartment.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.