Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
2010 Jeep Wrangler Islander, Automatic
Quick Lookups: Fluids
2010 Jeep Wrangler Islander, AutomaticSECTION Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Compressor Oil | 5.00 OZS. | 0.14 L | PAG 46 | S | |||
| Air Cond Refrigerant | 1.25 LBS. | 0.56 KG | R-134a | S | |||
| Automatic Transmission Fluid | Overhaul | 6.00 QTS. | 5.67 L | Automatic Transmission Fluid Plus 4 or equivalent | Dry fill capacity. Depending on type and size of Internal Cooler, length and inside diameter of Cooler Lines, or use of an Auxiliary Cooler, these figures may vary. | S | |
| Automatic Transmission Fluid | Service Fill | 3.00 QTS. | 2.83 L | Automatic Transmission Fluid Plus 4 or equivalent | S | ||
| Brake Fluid | N/A | N/A | DOT 3 Brake Fluid | S | |||
| Differential Gear Oil | Front,186 FBI (Model 30) | 2.10 PTS. | 0.99 L | API - GL-5, SAE 80W-90 Gear Oil. | S | ||
| Differential Gear Oil | Front,216 RBI (Model 44) | 2.70 PTS. | 1.27 L | API - GL-5, SAE 80W-90 Gear Oil. | Limited-Slip Rear Axles require the addition of 118 ml (4 oz.) MOPAR Limited Slip Additive or equivalent. | S | |
| Differential Gear Oil | Rear,226 RBI (Model 44) | 4.75 PTS. | 2.24 L | API - GL-5, SAE 80W-90 Gear Oil. | Limited-Slip Rear Axles require the addition of 118 ml (4 oz.) MOPAR Limited Slip Additive or equivalent. If equipped with Trailer Tow Package use MOPAR Synthetic Gear Oil, SAE 75W-140 | S | |
| Engine Coolant | 13.00 QTS. | 12.3 L | MOPAR Antifreeze/Coolant 5 Year/100,000 Mile Formula HOAT (Hybrid Organic Additive Technology) or equivalent | Includes: heater and coolant recovery tank filled to "max" level. | S | ||
| Engine Oil | w/Filter | 6.00 QTS. | 5.67 L | API - SAE 5W-20 | Use API Certified SAE 5W-20 Engine Oil, meeting the requirements of Chrysler Material Standard MS-6395. Refer to your engine oil filler cap for correct SAE grade. | S | |
| Fuel Tank | 2 Door | 18.60 GALS. | 70.4 L | S | |||
| Manual Transmission Fluid | 1.60 QTS. | 1.51 L | MOPAR Manual Transmission Fluid | Approximate dry fill or fill to bottom edge of fill plug hole. | S | ||
| Power Steering Fluid | N/A | N/A | MOPAR Hydraulic Power Steering Fluid | S | |||
| Transfer Case Fluid | 2.10 QTS. | 1.98 L | MOPAR Automatic Transmission Fluid Plus 4 | Approximate dry fill or fill to bottom edge of fill plug hole. | S | ||
| Windshield Washer Fluid | N/A | N/A | Windshield Antifreeze | Not radiator antifreeze. Follow the Manufacturer's Instructions for the mixture ratio. | S | ||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.